How to Service an Air Bag Sensor in the Quarter Panel on 2005 Dodge Caravan?

When working on the quarter panel mounted impact sensor, first open the hood and disconnect the battery negative cable, avoid working on the system until two minutes have passed. Take out the quarter panel on the side where the sensor is being changed. After that, open the two screws that hold the impact sensor, separate the electrical connector and remove the device from the vehicle. Your installation should begin by sliding in the new sensor, attaching the electrical connector and sealing it using the remaining two screws that must be tightened to 7 Nm (62 in. lbs.). Replace the quarter trim panel onto the car. Personal injury or death can be avoided by waiting to connect the battery negative cable until the system test is done. After you're done, ensure both the vehicle and system are working correctly before you close the hood.

OEM 2005 Dodge Caravan Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Air Bag Sensors found

View related parts
2005 Dodge Caravan Impact Sensor, Passenger Side Part Number: 4727069AD
$54.24 MSRP: $68.85
You Save: $14.61 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Airbag Impact; Air Bag Impact Sensor, Right; Air Bag Sensor; Side Impact Sensor; Sensor Side Airbag Impact
- Position: Passenger Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.5 x 3.3 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4727069AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Caravan Submodels:
- Base, C/V, Ec, SE, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2005 Dodge Caravan Impact Sensor, Driver Side Part Number: 4727261AD
$45.89 MSRP: $58.35
You Save: $12.46 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Airbag Impact; Air Bag Impact Sensor, Left; Air Bag Sensor; Side Impact Sensor; Sensor Side Airbag Impact
- Position: Driver Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.7 x 1.8 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4727261AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Caravan Submodels:
- Base, C/V, Ec, SE, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2005 Dodge Caravan Impact Sensor, Front Part Number: 4896059AA
Product Specifications
- Other Name: Sensor - Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor; Sensor Air Bag
- Position: Front
- Replaces: 4896023AA, 4686957AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.5 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896059AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Caravan Submodels:
- Base, C/V, SE, SXT | 2.4L L4, 3.3L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

2005 Dodge Caravan Air Bag Sensor Parts and Q&A

Q: How to Service an Air Bag Sensor in the Quarter Panel on 2005 Dodge Caravan?
A: When working on the quarter panel mounted impact sensor, first open the hood and disconnect the battery negative cable, avoid working on the system until two minutes have passed. Take out the quarter panel on the side where the sensor is being changed. After that, open the two screws that hold the impact sensor, separate the electrical connector and remove the device from the vehicle. Your installation should begin by sliding in the new sensor, attaching the electrical connector and sealing it using the remaining two screws that must be tightened to 7 Nm (62 in. lbs.). Replace the quarter trim panel onto the car. Personal injury or death can be avoided by waiting to connect the battery negative cable until the system test is done. After you're done, ensure both the vehicle and system are working correctly before you close the hood.