JeepParts
My Garage
My Account
Cart
OEM 2005 Dodge Durango Cigarette Lighter
Car Cigarette Lighter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Cigarette Lighters found
2005 Dodge Durango Power Outlet, Center Part Number: 4793554AC
$24.35 MSRP: $36.05You Save: $11.70 (33%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Lighter; 12 Volt Accessory Power Outlets: Rear Right, Rear Left, Center, Front, Rear; Housing; Cigarette Lighter Socket.; Power Outlet Mount; Armrest Outlet; Power Outlet Cigar; Power Outlet Power
- Position: Center
- Replaces: 4793554AB
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.2 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4793554AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2005 Dodge Durango Power Outlet, Front Part Number: 4685590
$26.67 MSRP: $39.45You Save: $12.78 (33%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Outlet; 12 Volt Accessory Power Outlet Housing, Front; Center; Cigarette Lighter Socket.; Lighter Socket; Power Outlet Base; Cigar Lighter Base; Serviced Without Cap.
- Position: Front
- Replaces: 4685590AB, 5026362AA, 6AL38DX9AA, 6AL38LXHAA
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.1 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4685590
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2005 Dodge Durango Cigarette Lighter Parts and Q&A
- Q: How to Service the Cigarette Lighter Power Outlet on 2005 Dodge Durango?A: You need to first disconnect and isolate the negative side of the battery to service the auxiliary cigarette lighter. If you are using a cigarette lighter, remove the knob and element from inside the cigarette lighter receptacle and for a cigarette lighter, unsnap the protective cap from the receptacle base. Inside the base of the receptacle, locate the rectangular retaining bosses that hold it in place on the panel. With the external pliers, place the snap ring tips into the spaces of the bosses, press down with your pliers to unseat them, then sideways rock the pliers to remove the bottom from the mount. Remove the base of the receptacle from the instrument panel so you can access the wire harness connector and release it from the base connector. Take out the mount from inside your instrument panel. To install the instrument, join the wire harness connector to the receptacle base connector and put the mount into the instrument panel, so that the splines in the receptacle line up with the grooves in the mount. Push the components down until the retaining bosses are in place. Then, fix the other component (or the protection cover) onto the center and attach the battery's black cable.
Related 2005 Dodge Durango Parts
2005 Dodge Durango Hood
2005 Dodge Durango Speedometer
2005 Dodge Durango Cup Holder
2005 Dodge Durango Door Hinge
2005 Dodge Durango Instrument Cluster
2005 Dodge Durango Seat Cover
2005 Dodge Durango Dash Panels
2005 Dodge Durango Door Latch Assembly
2005 Dodge Durango Seat Cushion
2005 Dodge Durango Seat Heater
2005 Dodge Durango Seat Switch
2005 Dodge Durango Washer Reservoir