How to Service the MAP Sensor on 2005 Dodge Magnum?

To disassemble the Manifold Pressure/ Vacuum Sensor, unlock and remove 1/4 turn counter clockwise the electrical connector and then push the sensor out. Check O-ring, clean up the mounting hole and inspect the O-ring. Install the sensor in place again, reconnect the electrical connector and put the negative battery cable.

OEM 2005 Dodge Magnum MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2005 Dodge Magnum M.A.P. Sensor Part Number: 56028562AB
$31.84 MSRP: $45.80
You Save: $13.96 (31%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.1 x 1.6 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028562AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Magnum Submodels:
- R/T, SE, SXT, SXT Special Edition | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS

2005 Dodge Magnum MAP Sensor Parts and Q&A

Q: How to Service the MAP Sensor on 2005 Dodge Magnum?
A: To disassemble the Manifold Pressure/ Vacuum Sensor, unlock and remove 1/4 turn counter clockwise the electrical connector and then push the sensor out. Check O-ring, clean up the mounting hole and inspect the O-ring. Install the sensor in place again, reconnect the electrical connector and put the negative battery cable.