How to Disassemble the Control Arm on 2005 Dodge Neon?

To start, take out the lower ball joint by easing the seal boot off with your screwdriver or similar tool. Fix the Receiver, Special Tool 6908-2, to a press, guide the bottom of the ball joint into the cup and position it so that the lower control arm is supported during the replacement. Put the larger end of Special Tool 6804 onto the ball joint and connect Special Tool 6804 to the press. Then, press the ball joint completely out of the lower control arm into the receiver with the press. After completing your cutting, remove all the pieces, including the tools, ball joint and arm. Using a vise, place the Ball Joint Press, Special Tool C-4212F, on the back isolator bushing for improved control. Insert the Receiver Cup which is Special Tool 9356-4, into the Ball Joint Press and fasten the set screw. Fit the Remover, Special Tool 9356-2, to the tip of the Ball Joint Press screw-drive and then set the Reaction Plate, Special Tool 9356-3, across the end of the control arm with the arrows facing the bushing flange. Position the Reaction Plate against the outer part of the Receiver Cup and use the Press's screw-drive to make contact with the Remover and the bushing equal across its entire circumference. Press the bushing out of the lower control arm completely, then use the screw-drive to remove the lower arm and the bushing and take out the Reaction Plate next.

OEM 2005 Dodge Neon Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Control Arms found

View related parts
2005 Dodge Neon Control Arm, Front Lower Driver Side Part Number: 4656731AN
$246.42 MSRP: $376.00
You Save: $129.58 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Front Left Suspension Control Arm and Ball Joint Assembly.; Lower Control Arm; Arm Lower Control Front; Arm Control; Suspension Control Arm
- Position: Front Lower Driver Side
- Replaces: 4656731AL, 4656731AH, 4656731AJ, 4656731AF, 4656731AK, 4656731AM, 4656731AG
- Item Weight: 9.10 Pounds
- Item Dimensions: 3.4 x 14.8 x 17.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4656731AN
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- SRT-4 | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2005 Dodge Neon Control Arm, Front Lower Passenger Side Part Number: 4656730AN
$246.42 MSRP: $376.00
You Save: $129.58 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Front Right Suspension Control Arm and Ball Joint Assembly.; Lower Control Arm; Arm Lower Control Front; Arm Control; Suspension Control Arm
- Position: Front Lower Passenger Side
- Replaces: 4656730AK, 4656730AL, 4656730AH, 4656730AM, 4656730AJ, 4656730AG, 4656730AF
- Item Weight: 8.90 Pounds
- Item Dimensions: 3.4 x 14.5 x 16.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4656730AN
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- SRT-4 | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2005 Dodge Neon Control Arm, Front Driver Side Part Number: 5272237AM
$185.01 MSRP: $347.00
You Save: $161.99 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Control; Suspension Control Arm, Front Left; Lower Control Arm
- Position: Front Driver Side
- Replaces: 5272237AF, 5272237AC, 5272237AK, 5272237AL, 5272237AJ, 5272237AH
- Item Weight: 8.50 Pounds
- Item Dimensions: 21.6 x 11.1 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5272237AM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SXT | 2.0L L4, 4 Cyl 2.0 L GAS
View related parts
2005 Dodge Neon Control Arm, Front Passenger Side Part Number: 5272236AM
$231.05 MSRP: $421.00
You Save: $189.95 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Control; Front Right Suspension Control Arm and Ball Joint Assembly.; Lower Control Arm
- Position: Front Passenger Side
- Replaces: 5272236AF, 5272236AJ, 5272236AL, 5272236AH, 5272236AK, 5272236AC
- Item Weight: 8.50 Pounds
- Item Dimensions: 21.0 x 10.8 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5272236AM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SXT | 2.0L L4, 4 Cyl 2.0 L GAS

2005 Dodge Neon Control Arm Parts and Q&A

Q: How to Disassemble the Control Arm on 2005 Dodge Neon?
A: To start, take out the lower ball joint by easing the seal boot off with your screwdriver or similar tool. Fix the Receiver, Special Tool 6908-2, to a press, guide the bottom of the ball joint into the cup and position it so that the lower control arm is supported during the replacement. Put the larger end of Special Tool 6804 onto the ball joint and connect Special Tool 6804 to the press. Then, press the ball joint completely out of the lower control arm into the receiver with the press. After completing your cutting, remove all the pieces, including the tools, ball joint and arm. Using a vise, place the Ball Joint Press, Special Tool C-4212F, on the back isolator bushing for improved control. Insert the Receiver Cup which is Special Tool 9356-4, into the Ball Joint Press and fasten the set screw. Fit the Remover, Special Tool 9356-2, to the tip of the Ball Joint Press screw-drive and then set the Reaction Plate, Special Tool 9356-3, across the end of the control arm with the arrows facing the bushing flange. Position the Reaction Plate against the outer part of the Receiver Cup and use the Press's screw-drive to make contact with the Remover and the bushing equal across its entire circumference. Press the bushing out of the lower control arm completely, then use the screw-drive to remove the lower arm and the bushing and take out the Reaction Plate next.