OEM 2005 Dodge Neon Cruise Control Switch

2005 Dodge Neon Cruise Control Switch Parts and Q&A

• Q: How to Service a Cruise Control Switch on 2005 Dodge Neon?

  A: The switch ought to be serviced safely and for this, disconnect the negative battery cable first, then remove the air cleaner lid, together with the inlet air temperature sensor and makeup air hose. Shut off the engine and, if indicated in the restraint systems, remove the air bag module as well. Then, remove the top screw from the speed control switch, place the steering wheel at 6 o'clock and remove the two screws from the opposite side of the switch. After disconnecting the electrical connector, take out the switch. Split the wires apart, tear the protective plastic off and attach the switch ensuring its rubber seal is in place and screws are tightened to 1.6 Nm (15 ins. lbs.). Attach the negative battery lead, slide in the air bag module, add the air cleaner cover, slack the inlet air temperature sensor cable and place the makeup air hose by its designated position.