How to Service and Repair an Exhaust Pipe on 2005 Dodge Neon?

Before service or repairs on the intermediate pipe in the exhaust system, first have the car up on a hoist, grease the band clamp fastener using penetrating oil and avoid greasing muffler or exhaust pipe isolators with petroleum lubricants; a liquid dish soap and water mixture works better. First, eliminate the muffler, then take off the band clamp joning the catalytic converter to the intermediate pipe. Then, remove the pipe's intermediate support isolator, divide it at the slip joint and get rid of the intermediate pipe. Clear any blockages from the pipe ends and muffler for a good seal and if anything is worn, rusted or broken, get rid of it. installed, do not make the clamps very tight until everything is aligned and the space is even. Fasten the intermediate pipe to the catalytic converter, the isolator support to the underbody, the muffler to the intermediate pipe and the isolator supports to the underbody. Keep every component in line from the system front and tighten all band clamp screws to 47 Nm (35 ft. lbs.). Do not fasten the band clamps all the way, since this will press the hourglass part to the base and spoil the clamp. When you are ready to change a band clamp, remove the nut, relax both sides and break the spot weld until the ends come loose, so the new one goes in the same way. After finishing, link the exhaust system ground strap, run the engine and ensure there are no leaks around the exhaust system and body.

OEM 2005 Dodge Neon Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Exhaust Pipes found

View related parts
2005 Dodge Neon Tail Pipe Part Number: 5290963AE
$105.54 MSRP: $606.00
You Save: $500.46 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Tail Pipe; Exhaust Pipe; Tailpipe; Pipe Exhaust
- Replaces: 5290963AC, 5290963AD
- Item Weight: 13.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5290963AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- SRT-4 | 4 Cyl 2.4 L GAS
View related parts
2005 Dodge Neon Muffler Part Number: 4546968AD
$181.93 MSRP: $261.00
You Save: $79.07 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Muffler Exhaust
- Replaces: 4546968AC, 4546968AB
- Item Weight: 18.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4546968AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SXT | 4 Cyl 2.0 L GAS
View related parts
2005 Dodge Neon Extension Pipe Part Number: 5278831AF
Product Specifications
- Other Name: Pipe - Exhaust Extension; Exhaust Intermediate Pipe; Exhaust Pipe; Intermed Pipe; Pipe Exhaust Extension
- Replaces: 5278831AE, 5278831AD
- Item Weight: 17.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5278831AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- SRT-4 | 4 Cyl 2.4 L GAS
View related parts
2005 Dodge Neon Muffler Part Number: 5273673AA
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Resonator; Muffler Exhaust
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5273673AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Dodge Neon Submodels:
- SE, SXT | 4 Cyl 2.0 L GAS
View related parts
2005 Dodge Neon Extension Pipe Part Number: 4546975AH
Product Specifications
- Other Name: Pipe - Exhaust Extension; Exhaust Intermediate Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Intermed Pipe; Pipe Exhaust Extension
- Replaces: 4546975AG
- Item Weight: 14.00 Pounds
- Item Dimensions: 90.9 x 22.0 x 10.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4546975AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- ACR, Base, ES, SE, SXT | 4 Cyl 2.0 L GAS
View related parts
2005 Dodge Neon Front Pipe Part Number: 5278941AD
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter; Exhaust Pipe; Converter & Pipe
- Replaces: 5278941AB, 5278941AC
- Item Weight: 13.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5278941AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- SRT-4 | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2005 Dodge Neon Catalytic Converter Part Number: 4546942AJ
Product Specifications
- Other Name: Converter - Catalytic; Converter Catalytic
- Item Weight: 14.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4546942AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Dodge Neon Submodels:
- ACR, Base, ES, High Line, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2005 Dodge Neon Catalytic Converter Part Number: 5278126AL
Product Specifications
- Other Name: Converter - Catalytic; Exhaust Pipe; Front Pipe; Converter & Pipe; Converter Catalytic
- Item Weight: 13.50 Pounds
- Item Dimensions: 34.7 x 13.1 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5278126AL
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- R/T, SE, SXT | 4 Cyl 2.0 L GAS

2005 Dodge Neon Exhaust Pipe Parts and Q&A

Q: How to Service and Repair an Exhaust Pipe on 2005 Dodge Neon?
A: Before service or repairs on the intermediate pipe in the exhaust system, first have the car up on a hoist, grease the band clamp fastener using penetrating oil and avoid greasing muffler or exhaust pipe isolators with petroleum lubricants; a liquid dish soap and water mixture works better. First, eliminate the muffler, then take off the band clamp joning the catalytic converter to the intermediate pipe. Then, remove the pipe's intermediate support isolator, divide it at the slip joint and get rid of the intermediate pipe. Clear any blockages from the pipe ends and muffler for a good seal and if anything is worn, rusted or broken, get rid of it. installed, do not make the clamps very tight until everything is aligned and the space is even. Fasten the intermediate pipe to the catalytic converter, the isolator support to the underbody, the muffler to the intermediate pipe and the isolator supports to the underbody. Keep every component in line from the system front and tighten all band clamp screws to 47 Nm (35 ft. lbs.). Do not fasten the band clamps all the way, since this will press the hourglass part to the base and spoil the clamp. When you are ready to change a band clamp, remove the nut, relax both sides and break the spot weld until the ends come loose, so the new one goes in the same way. After finishing, link the exhaust system ground strap, run the engine and ensure there are no leaks around the exhaust system and body.