How to Service and Repair a Sway Bar Kit in the Front Suspension on 2006 Chrysler Crossfire?

Question

Accepted Answer

Before doing any work on the sway bar kit in the front suspension, unscrew the retainer brackets and nuts from both the right and left lower control arms. Once done, take out the sway bar bracket and all its nuts from the vehicle and then you can take off the sway bar. Every rubber bushing on the sway bar should be taken off. Before anything else, position the side bushings on the sway bar and make sure the lower control arms must be raised to fit them on the connecting parts. Add all the bolts and nuts to the sway bar's brackets and align the arrows along with "TOP," which should be on the right, on the sway bar. Place the sway bar so it is straight in the car and after that secure it to the inner retainer brackets with a torque of 20 Nm. Both sides' sway bar bracket nuts should be tightened to the control arm to the specified torque and then lower the vehicle to check for wheel alignment.

OEM 2006 Chrysler Crossfire Sway Bar Kit

3 Sway Bar Kits found

2006 Chrysler Crossfire Stabilizer Bar, Rear Part Number: 5104992AA

2006 Chrysler Crossfire Stabilizer Bar, Rear Part Number: 5099081AA

2006 Chrysler Crossfire Stabilizer Bar, Front Part Number: 5098980AA

2006 Chrysler Crossfire Sway Bar Kit Parts and Q&A

Related 2006 Chrysler Crossfire Parts

Alternate Year Models