How to Effectively Service and Repair a Front Suspension Shock Absorber on 2006 Chrysler Crossfire?

Take care to place the front tires on the ground with the car lifted at the back before unscrewing the upper shock absorber bracket nut. You should start by getting rid of the upper mounting nut, as well as both the washer and rubber mounts. Then, raise and hold up the vehicle, take off the nut and bolt from the lower control arm and pull the shock down and out of the vehicle. Remove any mounting pieces from the shock absorber and look at each mounting piece for any signs of damage. Put the mounting hardware and the bushings on the lower mount and the shock absorber's upper stud. First, put the shock absorber into the vehicle, with the top going in and make sure the lower control arm bracket lines up with the shock. Attach the shock absorber to the car with the lower nut and bolt, tighten the bolt to a torque of 55 Nm (41 ft. lbs.). Lift the vehicle lower and guide the top of the shock absorber into the mounting hole, then put the rubber mount and washer over the shock stud as you guide it down. Lastly, put in the upper mounting nut, tighten it to 18 Nm (13 ft. lbs.) and lower the car to examine vehicle alignment.

OEM 2006 Chrysler Crossfire Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Shock Absorbers found

View related parts
2006 Chrysler Crossfire Shock Absorber, Front Part Number: 5142011AA
$54.43 MSRP: $69.00
You Save: $14.57 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock - Suspension; Shock Absorber, Front; Suspension Shock Absorber; Shock; Shock Absorber Suspension Front
- Position: Front
- Item Weight: 4.80 Pounds
- Item Dimensions: 15.6 x 15.9 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5142011AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Shock Absorber, Rear Part Number: 5161528AB
$153.05 MSRP: $194.02
You Save: $40.97 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock - Suspension; Shock Absorber, Rear; Suspension Shock Absorber; Shock; Shock Absorber Suspension Rear
- Position: Rear
- Item Weight: 3.30 Pounds
- Item Dimensions: 42.8 x 3.3 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5161528AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Shock Absorber, Rear Part Number: 5174007AA
$194.08 MSRP: $246.03
You Save: $51.95 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock - Suspension; Shock Absorber, Rear; Suspension Shock Absorber; Shock; Shock Absorber Suspension
- Position: Rear
- Item Weight: 4.50 Pounds
- Item Dimensions: 43.7 x 3.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5174007AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Shock Absorber, Front Part Number: 5135484AA
$197.24 MSRP: $250.03
You Save: $52.79 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut - Suspension; Shock Absorber, Front; Suspension Shock Absorber; Shock; Shock Absorber Suspension Front
- Position: Front
- Item Weight: 4.70 Pounds
- Item Dimensions: 29.9 x 5.1 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5135484AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Shock Absorber, Front Part Number: 68029783AA
Product Specifications
- Other Name: Shock - Suspension; Shock Absorber, Front; Suspension Shock Absorber; Shock; Shock Absorber Suspension Front
- Position: Front
- Item Weight: 4.20 Pounds
- Item Dimensions: 22.7 x 9.9 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 68029783AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Shock Absorber Part Number: 5127493AA
Product Specifications
- Other Name: Absorber Package - Shock Absorber; Shock Assembly; Repair Kit Shock Absorber
- Item Weight: 1.20 Pounds
- Item Dimensions: 5.2 x 5.0 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5127493AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Spring Insulator, Front Lower Part Number: 5101369AA
Product Specifications
- Other Name: Grommet - Shock Absorber; Shock Mount Insulator, Front Lower, Rear Lower; Coil Spring Insulator; Shock Lower Insulator; Bumper; Grommet Shock Absorber
- Position: Front Lower
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.2 x 2.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5101369AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Shock Upper Insulator, Front Part Number: 5101368AA
Product Specifications
- Other Name: Grommet - Shock Absorber; Shock Mount Insulator, Front Upper, Rear Upper; Support; Bumper; Grommet Shock Absorber
- Position: Front Upper
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.5 x 1.5 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5101368AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Top Cap, Front Part Number: 5101244AA
Product Specifications
- Other Name: Cover - Shock Absorber; Suspension Strut Mount Cap, Front; Shock Mount Cap; Cap Shock Absorber
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.8 x 1.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5101244AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Shock Washer, Front Part Number: 5099735AA
Product Specifications
- Other Name: Retainer - Shock Absorber; Shock Mount Washer, Front, Rear; Bumper Washer; Washer Shock Absorber
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.9 x 2.0 x 0.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099735AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Shock Absorber, Front Part Number: 68029784AA
Product Specifications
- Other Name: Strut - Suspension; Shock Absorber, Front; Suspension Shock Absorber; Shock; Shock Absorber Suspension Front
- Position: Front
- Replaces: 5096749AA
- Item Weight: 5.00 Pounds
- Item Dimensions: 42.7 x 3.8 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 68029784AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited | 3.2L V6, 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Shock Absorber, Rear Part Number: 68029786AA
Product Specifications
- Other Name: Strut - Suspension; Shock Absorber, Rear; Suspension Shock Absorber; Shock; Shock Absorber Suspension Rear
- Position: Rear
- Replaces: 5096751AA
- Item Weight: 4.20 Pounds
- Item Dimensions: 48.0 x 5.2 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68029786AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Shock Absorber, Rear Part Number: 68029785AA
Product Specifications
- Other Name: Shock - Suspension; Shock Absorber, Rear; Suspension Shock Absorber; Shock; Shock Absorber Suspension Rear
- Position: Rear
- Replaces: 5104993AA
- Item Weight: 3.90 Pounds
- Item Dimensions: 43.7 x 3.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 68029785AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited | 3.2L V6, 6 Cyl 3.2 L GAS

2006 Chrysler Crossfire Shock Absorber Parts and Q&A

Q: How to Effectively Service and Repair a Front Suspension Shock Absorber on 2006 Chrysler Crossfire?
A: Take care to place the front tires on the ground with the car lifted at the back before unscrewing the upper shock absorber bracket nut. You should start by getting rid of the upper mounting nut, as well as both the washer and rubber mounts. Then, raise and hold up the vehicle, take off the nut and bolt from the lower control arm and pull the shock down and out of the vehicle. Remove any mounting pieces from the shock absorber and look at each mounting piece for any signs of damage. Put the mounting hardware and the bushings on the lower mount and the shock absorber's upper stud. First, put the shock absorber into the vehicle, with the top going in and make sure the lower control arm bracket lines up with the shock. Attach the shock absorber to the car with the lower nut and bolt, tighten the bolt to a torque of 55 Nm (41 ft. lbs.). Lift the vehicle lower and guide the top of the shock absorber into the mounting hole, then put the rubber mount and washer over the shock stud as you guide it down. Lastly, put in the upper mounting nut, tighten it to 18 Nm (13 ft. lbs.) and lower the car to examine vehicle alignment.