How to remove a Sway Bar Kit on Chrysler Crossfire?

The first step is to unbolt and lift away the retainer brackets and bolts from the lower control arms kept by the front sway bar kit. Then, separate the sway bar kit bracket along with the nuts and bolts from the inner retainer brackets. Next, take out the sway bar kit from the car and lastly, pull out all rubber bushings from the bar.

How to Install a Sway Bar Kit on Chrysler Crossfire?

At first, you should insert right and left sway bar bushings (3 and 5) onto the sway bar kit (6). It is possible that the lower arms (2) must be raised to mount the bushing (2) to its match point. Then, align the sway bar kit (6) with all four brackets (1 and 4), but do not tighten the bolts and nuts yet; be sure the arrows and the word "TOP" on the right are pointing up. Center the sway bar kit (6) in the car and fasten the sway bar bolts (4) to the inner retainer brackets until the torque reaches 20 Nm (15 ft.lbs.). After that, tighten both of the inboard bracket nuts on the sway bar kit (both right and left) to the lower control arm (2) to the set torque specification. Lower the vehicle and inspect your alignment after everything is done.

OEM Chrysler Crossfire Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Kits found

View related parts
Chrysler Crossfire Stabilizer Bar, Rear Part Number: 5104992AA
$33.47 MSRP: $42.43
You Save: $8.96 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Sway; Suspension Stabilizer Bar, Rear; Sway Bar; Bar Rear Sway
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Stabilizer Bar, Rear Part Number: 5099081AA
Product Specifications
- Other Name: Bar - Rear Sway; Suspension Stabilizer Bar, Rear; Sway Bar; Bar Rear Sway
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Stabilizer Bar, Front Part Number: 5098980AA
Product Specifications
- Other Name: Bar - Front Sway; Suspension Stabilizer Bar, Front; Sway Bar; Bar Front Sway
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

Chrysler Crossfire Sway Bar Kit

Choose OEM Sway Bar Kit that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Sway Bar Kit follows strict manufacturing steps to lock in quality and fit. If your Chrysler Crossfire matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Crossfire parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

This Chrysler Crossfire Sway Bar Kit is a great addition upgrade for anyone who wants to take their car to the next level. Considered to be one of the best when it comes to quality and stability, this Sway Bar Kit enhances the stability of the vehicle during cornering especially on; bumpy terrains, hence reducing on body roll. The Sway Bar Kit is intended for divers sorts of Chrysler Crossfire models and links opposite wheels through the torsion spring enhancing the roll stiffness while remaining the vertical spring coefficient invariable. The design in some of the cars has been developed in a way that they keep the wheels at a fixed height and hence minimize the lateral cause which in turn enhances the grip by a great deal. Chrysler Crossfire Sway Bar Kit offers the improvement of the car's efficiency and makes it safer, therefore it can be considered as the vital part for those who enjoy driving. What makes it a valuable tool is the way it affects the fundamental characteristics of the car; understeer and oversteer, making the car more responsive and manageable. Also, the Sway Bar Kit can be named in the automotive market a bit distinctive because of totality compatibility with the design of the Chrysler Crossfire, which has many components with Mercedes-Benz SLK. Such a combination of design and engineering guarantees the customers that Chrysler Crossfire Sway Bar Kit performs outstandingly and it is a must-have for any Crossfire car to enhance its performance. It is, therefore, appropriate to conclude that the Chrysler Crossfire Sway Bar Kit has all these characteristics due to the brand's quality and its technological implementation into the cars.

Chrysler Crossfire Sway Bar Kit Parts and Q&A

Stabilizer Bar, Front
5098980AA
Q: How to remove a Sway Bar Kit on Chrysler Crossfire?
A:
The first step is to unbolt and lift away the retainer brackets and bolts from the lower Control Arms kept by the front sway bar kit. Then, separate the sway bar kit bracket along with the nuts and bolts from the inner retainer brackets. Next, take out the sway bar kit from the car and lastly, pull out all rubber bushings from the bar.
Stabilizer Bar, Rear
5104992AA
Q: How to Install a Sway Bar Kit on Chrysler Crossfire?
A:
At first, you should insert right and left sway bar bushings (3 and 5) onto the sway bar kit (6). It is possible that the lower arms (2) must be raised to mount the bushing (2) to its match point. Then, align the sway bar kit (6) with all four brackets (1 and 4), but do not tighten the bolts and nuts yet; be sure the arrows and the word "TOP" on the right are pointing up. Center the sway bar kit (6) in the car and fasten the sway bar bolts (4) to the inner retainer brackets until the torque reaches 20 Nm (15 ft.lbs.). After that, tighten both of the inboard bracket nuts on the sway bar kit (both right and left) to the lower Control Arm (2) to the set torque specification. Lower the vehicle and inspect your alignment after everything is done.