How to Service and Repair a Left Engine Mount on 2006 Chrysler Pacifica?

Start the engine service by turning off the negative battery cable, then open the engine cover and remove the radiator cooling fan assembly. Raise and secure the vehicle and remove both nuts securing the engine to the cradle. Lower the car and fasten the engine stand to it so the engine is secure. Unbolt the engine mounts and then take them out. To fit the engine, position the engine mount over the bracket and tighten the nut until you reach 101 Nm or 75 ft. lbs. After that, put the left mount onto the engine and tighten its bolts to 54 Nm (40 ft. lbs.). Lift the vehicle just enough to remove its engine support still and then put the vehicle back on support stands. After both engine mount to cradle nuts are installed, tighten them to 101 Nm (75 ft. lbs.). Lowerthe vehicle, add the radiator fan assembly, place back the engine cover and then reattach the negative battery cable.

OEM 2006 Chrysler Pacifica Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Engine Mounts found

View related parts
2006 Chrysler Pacifica Front Mount Bracket Part Number: 4809779AB
$110.05 MSRP: $166.00
You Save: $55.95 (34%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Front; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount
- Position: Front
- Replaces: 4809779AA, 5510006AC
- Item Weight: 2.80 Pounds
- Item Dimensions: 9.2 x 8.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4809779AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 3.5L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
2006 Chrysler Pacifica Front Mount, Rear Part Number: 4809780AD
Product Specifications
- Other Name: Insulator - Engine Support; Engine Mount, Front, Rear; Engine Mount Bracket; Motor Mount; Rear Mount; Cushion Engine Support; Engine Mount
- Position: Rear
- Replaces: 4809780AA, 4809780AC, 4809780AB
- Item Weight: 5.20 Pounds
- Item Dimensions: 2.7 x 2.6 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4809780AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
2006 Chrysler Pacifica Front Mount Part Number: 5510007AD
Product Specifications
- Other Name: Insulator - Engine Support; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Rear Mount; Cushion Engine Support; Engine Mount
- Position: Front
- Replaces: 5510007AC
- Item Weight: 5.60 Pounds
- Item Dimensions: 5.6 x 5.5 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5510007AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS

2006 Chrysler Pacifica Engine Mount Parts and Q&A

Q: How to Service and Repair a Left Engine Mount on 2006 Chrysler Pacifica?
A: Start the engine service by turning off the negative battery cable, then open the engine cover and remove the radiator cooling fan assembly. Raise and secure the vehicle and remove both nuts securing the engine to the cradle. Lower the car and fasten the engine stand to it so the engine is secure. Unbolt the engine mounts and then take them out. To fit the engine, position the engine mount over the bracket and tighten the nut until you reach 101 Nm or 75 ft. lbs. After that, put the left mount onto the engine and tighten its bolts to 54 Nm (40 ft. lbs.). Lift the vehicle just enough to remove its engine support still and then put the vehicle back on support stands. After both engine mount to cradle nuts are installed, tighten them to 101 Nm (75 ft. lbs.). Lowerthe vehicle, add the radiator fan assembly, place back the engine cover and then reattach the negative battery cable.