How to remove the left engine mount on Chrysler Pacifica?

You should disconnect the negative battery cable as the very first step in removing the left engine mount. Following that, take out the cruise control servo and set it away and next, unbolt the radiator fan assembly. After that, remove the left exhaust manifold and take out the starter. Support the vehicle and take out the lower engine bracket mount fasteners from the engine. Once that's done, take off the engine mount to cradle fastener and then use the ramps to bring the car off its approach. Supply the floor jack below the engine and then detach the bolts that secure the upper engine mount bracket to the engine block, finally unclamp and remove the engine mount. After that, remove the engine mount from the bracket.

How to Install an Engine Mount on Chrysler Pacifica?

Put the torque strut in place first and then tighten the fasteners to 54 Nm (40 ft.lbs.). After that, take out the floor jack and drop the car to the ground. Lastly, attach the negative battery cable to its spot.

OEM Chrysler Pacifica Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

27 Engine Mounts found

View related parts
Chrysler Pacifica Strut Mount Part Number: 68485537AA
$46.07 MSRP: $68.60
You Save: $22.53 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine; Engine Torque Strut; Engine Mount Torque Strut; Motor Mount; Rear Support
- Replaces: 68224737AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Pacifica Rear Mount Part Number: 4809959AH
$83.62 MSRP: $120.00
You Save: $36.38 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Isolator - Engine Mount; Engine Mount, Rear; Engine Mount Bracket; Engine Mount; Motor Mount
- Position: Rear
- Replaces: 4809959AF, 4809959AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Pacifica | Base, Limited, Touring | 4.0L V6, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Rear Mount Part Number: 4880403AE
$147.27 MSRP: $260.00
You Save: $112.73 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Isolator - Engine Mount; Engine Mount, Rear; Engine Mount Bracket; Engine Mount; Motor Mount
- Position: Rear
- Replaces: 4880403AD, 4880403AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 3.8L V6, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Bracket - Transmission Mount Part Number: 68470172AA
$71.30 MSRP: $109.00
You Save: $37.70 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: TRANSMISSION MOUNT
- Replaces: 68224740AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Pacifica Front Mount Part Number: 4880402AD
$74.48 MSRP: $114.00
You Save: $39.52 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Isolator - Engine Mount; Engine Mount, Front; Engine Mount Bracket; Engine Mount; Motor Mount
- Position: Front
- Replaces: 4880402AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Pacifica | Base, LX | 3.8L V6, 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Rear Mount Part Number: 4880408AD
$78.94 MSRP: $121.00
You Save: $42.06 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Isolator - Engine Mount; Engine Mount, Rear; Engine Mount Bracket; Engine Mount; Motor Mount
- Position: Rear
- Replaces: 4880408AC, 4880408AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 4.0L V6, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Bracket Transmission Mount Part Number: 68334871AB
$79.78 MSRP: $121.00
You Save: $41.22 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Transmission Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2025 Chrysler Pacifica | Hybrid Limited, Hybrid Pinnacle, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus | 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Bracket - Engine Mount Part Number: 68273394AA
$93.83 MSRP: $144.00
You Save: $50.17 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BRACKET-ENGINE MOUNT
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2025 Chrysler Pacifica | Limited, Pinnacle, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Pacifica Bracket Transmission Mount Part Number: 68334871AA
$107.71 MSRP: $165.00
You Save: $57.29 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Transmission Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017 Chrysler Pacifica | Hybrid Platinum, Hybrid Premium | 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Front Mount Bracket Part Number: 4809779AB
$110.05 MSRP: $166.00
You Save: $55.95 (34%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Front; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount
- Position: Front
- Replaces: 4809779AA, 5510006AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chrysler Pacifica | Base, Limited, Touring | 3.5L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Transmission Mount Isolator Part Number: 68224742AD
$159.47 MSRP: $242.00
You Save: $82.53 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Isolator-Transmission Mount; Isolator Transmission Mount
- Position: Driver Side
- Replaces: 68224742AC, 68224742AA, 68224742AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Pacifica Front Support Part Number: 68224744AC
$57.98 MSRP: $86.95
You Save: $28.97 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount
- Replaces: 68224744AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Pacifica Strut Mount Part Number: 68237968AD
$122.21 MSRP: $162.00
You Save: $39.79 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Isolator - Engine; Engine Torque Strut; Engine Mount Torque Strut; Motor Mount; Rear Support
- Replaces: 68237968AA, 68237968AC, 68237968AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus | 3.6L V6, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Mount Part Number: 68224746AD
$256.36 MSRP: $391.00
You Save: $134.64 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator; Engine Mount Bracket; Motor Mount; Isolator Engine Mount; Isolator
- Replaces: 68224746AB, 68224746AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Pacifica Motor Mount, Passenger Side Part Number: 68237965AF
$288.92 MSRP: $430.00
You Save: $141.08 (33%)
ADD TO CART
Product Specifications
- Other Name: Insulator; Engine Mount, Right; Engine Mount Bracket; Mount; Isolator Engine Mount
- Position: Passenger Side
- Replaces: 68237965AE, 68237965AC, 68237965AB, 68237965AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus | 3.6L V6, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Support - Engine Part Number: 68319584AA
$38.59 MSRP: $57.45
You Save: $18.86 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SUPPORT-ENGINE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2025 Chrysler Pacifica | Limited, Pinnacle, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Pacifica Mount Bracket Part Number: 4893414AD
$56.43 MSRP: $82.95
You Save: $26.52 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine; Engine Mount Support Bracket; Engine Mount Bracket; Motor Mount; Support Engine Timing Cover
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Front Mount Bracket, Rear Part Number: 4809963AE
$21.75 MSRP: $31.25
You Save: $9.50 (31%)
Product Specifications
- Other Name: Bracket - Engine Mount; Auto/Manual Transmission, Rear; Engine Mount; Torque Strut; Motor Mount; Rear Mount Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Pacifica | Base, LX | 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Front Mount, Rear Part Number: 4809780AD
Product Specifications
- Other Name: Insulator - Engine Support; Engine Mount, Front, Rear; Engine Mount Bracket; Motor Mount; Rear Mount; Cushion Engine Support; Engine Mount
- Position: Rear
- Replaces: 4809780AA, 4809780AC, 4809780AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chrysler Pacifica | Base, Limited, Touring | 3.5L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Front Mount Part Number: 5510007AB
Product Specifications
- Other Name: Insulator - Engine Support; Engine Mount, Front; Engine Mount Bracket; Motor Mount
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Chrysler Pacifica | Base | 6 Cyl 3.5 L GAS

| Page 1 of 2 |Next >

1-20 of 27 Results

Chrysler Pacifica Engine Mount

Choose OEM Engine Mount that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Engine Mount follows strict manufacturing steps to lock in quality and fit. If your Chrysler Pacifica matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Pacifica parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

One of the most vital parts that have accrued tremendous reputation in relation to the Chrysler brand is the Chrysler Pacifica Engine Mount, which is a significant sub assembly that holds a preeminent role in the conduction and seamless performance of Chrysler brand's utility vehicles the Chrysler Pacifica. This part reduces noise originating from the engine and any vibration that the engine and transaxle will produce when it is in use and the Engine Mount is safely supporting such by providing a smooth ride for the user. This is important especially for Chrysler Pacifica which is known to be an excellent car, and has even won awards like "prime Minivan of 2016" and penning on, "2020 prime Family Car." The Engine Mount is versatile and can work for any Pacifica Gas model or the Pacifica plug-in hybrid model, making the car more efficient and safer. Starting from just basic rubber engine mounts that are used by most vehicle manufacturers, going up to fully active electronic engine mounts which adapt the stiffness depending on the engine speed, the Chrysler Pacifica Engine Mount is an automotive marvel in the market. They do not only enhance the efficiency but also help to avoid trouble areas leading to vehicle's breakdown. With the ever changing model of the new Chrysler Pacifica, the Engine Mount stands out as a symbol of prosperity and advancement in the annual brand as it seeks to provide the prime and safest vehicle to its users. The Chrysler Pacifica Engine Mount is just as crucial when cruising city roads and highways during family trips and vacations, and the prime of the vehicles' features, be it the engine, the interior, or safety features, is an enchanting combination of the two.

Chrysler Pacifica Engine Mount Parts and Q&A

Rear Mount
4809959AH
Q: How to remove the left engine mount on Chrysler Pacifica?
A:
You should disconnect the negative Battery Cable as the very first step in removing the left engine mount. Following that, take out the cruise control servo and set it away and next, unbolt the radiator fan assembly. After that, remove the left Exhaust Manifold and take out the starter. Support the vehicle and take out the lower engine bracket mount fasteners from the engine. Once that's done, take off the engine mount to cradle fastener and then use the ramps to bring the car off its approach. Supply the floor jack below the engine and then detach the bolts that secure the upper engine mount bracket to the engine block, finally unclamp and remove the engine mount. After that, remove the engine mount from the bracket.
Front Mount
4880402AD
Q: How to Install an Engine Mount on Chrysler Pacifica?
A:
Put the torque strut in place first and then tighten the fasteners to 54 Nm (40 ft.lbs.). After that, take out the floor jack and drop the car to the ground. Lastly, attach the negative Battery Cable to its spot.