How to Service and Repair the Front Cross-Member on 2006 Chrysler Pacifica?

To service the engine cradle crossmember, disconnect the battery, install the overhead support fixture and remove required components. Lower the vehicle for the cradle, remove and install with proper alignment. Reconnect everything, including the brake lines, control arms, and battery.

OEM 2006 Chrysler Pacifica Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Front Cross-Members found

View related parts
2006 Chrysler Pacifica Floor Crossmember Part Number: 5054618AA
Product Specifications
- Other Name: Crossmember - Front Floor; Floor Pan Crossmember, Rear; Crossmember Front Floor
- Item Weight: 19.60 Pounds
- Item Dimensions: 56.1 x 14.6 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5054618AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Chrysler Pacifica Engine Cradle, Front Part Number: 4743166AH
Product Specifications
- Other Name: Crossmember - Front Suspension; Engine Cradle, Front; Cradle Front Suspension
- Position: Front
- Replaces: 4743166AG
- Item Weight: 81.60 Pounds
- Item Dimensions: 54.1 x 48.2 x 16.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4743166AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS

2006 Chrysler Pacifica Front Cross-Member Parts and Q&A

Q: How to Service and Repair the Front Cross-Member on 2006 Chrysler Pacifica?
A: To service the engine cradle crossmember, disconnect the battery, install the overhead support fixture and remove required components. Lower the vehicle for the cradle, remove and install with proper alignment. Reconnect everything, including the brake lines, control arms, and battery.