How to Service and Repair a Hood Hinge on 2006 Chrysler Pacifica?

First, place the hood on the side you want to repair and remove the cowl plenum grille before starting any service. Outline with a grease pencil or use another tool to mark where each hinge and bolt should be attached. Get rid of the pivot bolt and pivot bushing first and after that, take off the bolts connecting the upper or lower part of the hinge. Separate the hood from the car and when needed, paint the hinge before putting it into place. Set the upper hood hinge in place with the hood and secure it loosely and secure the lower hood hinge in the cowl in the same way. Have someone help you to lift the hood onto the vehicle and then, together, install the pivot bolts and bushings so the hood halves are secure, tighten the bolt to a torque of 28 N.m (250 in.lbs.). Attach the cowl plenum grille back on and make sure all marks are correct and all bolts have been tightened, so the hood aligns properly. Set the operation and alignment of the hood, then tighten the bolts holding the hinge to the body to 9 N.m and the bolts joining the hinge to the hood to 14 N.m. After that, close the hood, get rid of the supports and test the hood to make sure it works.

OEM 2006 Chrysler Pacifica Hood Hinge

Hood Bracket Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Hood Hinges found

View related parts
2006 Chrysler Pacifica Hinge, Front Passenger Side Part Number: 5103484AC
$15.12 MSRP: $43.40
You Save: $28.28 (66%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Package - Hood; Hood Hinge, Front Right; Hinge Hood
- Position: Front Passenger Side
- Item Weight: 1.10 Pounds
- Item Dimensions: 13.1 x 3.0 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5103484AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Chrysler Pacifica Hinge, Front Driver Side Part Number: 5103485AC
Product Specifications
- Other Name: Hinge Package - Hood; Hood Hinge, Front Left; Hinge Hood
- Position: Front Driver Side
- Item Weight: 1.10 Pounds
- Item Dimensions: 13.8 x 2.0 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5103485AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Chrysler Pacifica Hinge, Front Driver Side Part Number: 5054015AD
Product Specifications
- Other Name: Hinge - Hood Body Half; Hood Hinge, Front Left; Hinge Hood Body Half
- Position: Front Driver Side
- Replaces: 5054015AC
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.1 x 2.0 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5054015AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Chrysler Pacifica Hinge, Front Passenger Side Part Number: 5054014AD
Product Specifications
- Other Name: Hinge - Hood Body Half; Hood Hinge, Front Right; Hinge Hood Body Half
- Position: Front Passenger Side
- Replaces: 5054014AC
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.2 x 2.1 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5054014AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2006 Chrysler Pacifica Hood Hinge Parts and Q&A

Q: How to Service and Repair a Hood Hinge on 2006 Chrysler Pacifica?
A: First, place the hood on the side you want to repair and remove the cowl plenum grille before starting any service. Outline with a grease pencil or use another tool to mark where each hinge and bolt should be attached. Get rid of the pivot bolt and pivot bushing first and after that, take off the bolts connecting the upper or lower part of the hinge. Separate the hood from the car and when needed, paint the hinge before putting it into place. Set the upper hood hinge in place with the hood and secure it loosely and secure the lower hood hinge in the cowl in the same way. Have someone help you to lift the hood onto the vehicle and then, together, install the pivot bolts and bushings so the hood halves are secure, tighten the bolt to a torque of 28 N.m (250 in.lbs.). Attach the cowl plenum grille back on and make sure all marks are correct and all bolts have been tightened, so the hood aligns properly. Set the operation and alignment of the hood, then tighten the bolts holding the hinge to the body to 9 N.m and the bolts joining the hinge to the hood to 14 N.m. After that, close the hood, get rid of the supports and test the hood to make sure it works.