How Can a Deeply Scored or Warped Brake Drum Be Machined and Installed on 2006 Chrysler Sebring?

A badly scored or warped brake drum may be machined on a brake lathe but if it is too much in diameter it will need to be replaced. Take the drum off by backing off the adjuster screw, check brake shoes. Clean mating surfaces and adjust shoes followed by re-installing the drum and wheel assembly before testing.

OEM 2006 Chrysler Sebring Brake Drum

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Drum found

View related parts
2006 Chrysler Sebring Drum, Rear Part Number: 4779286AA
Product Specifications
- Other Name: Drum - Brake; Brake Drum, Rear; Drum Brake; Brake Drum
- Position: Rear
- Item Weight: 14.40 Pounds
- Item Dimensions: 13.8 x 14.3 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4779286AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS

2006 Chrysler Sebring Brake Drum Parts and Q&A

Q: How Can a Deeply Scored or Warped Brake Drum Be Machined and Installed on 2006 Chrysler Sebring?
A: A badly scored or warped brake drum may be machined on a brake lathe but if it is too much in diameter it will need to be replaced. Take the drum off by backing off the adjuster screw, check brake shoes. Clean mating surfaces and adjust shoes followed by re-installing the drum and wheel assembly before testing.