How to Remove and Replace a Brake Drum on Chrysler Sebring?

Raise the car, undo the wheel mounting nuts, take off the tire and wheel and then you can remove the brake drum. Slide the brake drum free from the mounting studs of the hub and bearing. Should the drum not come loose, loosen the brake adjuster screw by taking out the grey plug from below the wheel cylinder. Put a small screwdriver through the hole in the support plate, down under the adjuster and against the lever pawl that connects to and swivels with the back brake shoe. With the push of a screwdriver on the pawl, rotate the wheel upward to loosen the brake by using either another screwdriver or a specific adjustment tool made for brakes. After the adjuster screw is listed, drive the drum off of the wheel mounting studs.

How to Maintain and Fix a Brake Drum on Chrysler Sebring?

For parking brake drum maintenance, lift out the rear brake assembly and prop it up with wire or something similar. Following that, insert the shoe and lining assembly deeper to take out the shoe hold-down cup. Attach the adjuster so that the shoe adjusting bolt of the left-hand wheel is positioned toward the front of the car and the one on the right is near the rear when installing the device. There are different loads on the shoe-to-anchor springs and their colors help you tell them apart; the right wheel is lined up with the left. While inspecting, measure the thickness of the brake lining a few times and if it is below 1.0 mm (0.039 inch), replacement is required. Apart from that, take the inner diameter measurements of the brake disc drum with a dial gauge caliper or micrometer at two or more places, with a standard of 168.0 mm (6.6 inch) and upper limit of 169.0 mm (6.7 inch); if this value is reached or exceeded, you should replace the drum.

OEM Chrysler Sebring Brake Drum

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Drums found

View related parts
Chrysler Sebring Brake Drum, Rear Part Number: 5105617AC
$118.83 MSRP: $166.00
You Save: $47.17 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Drum - Brake; Brake Drum, Rear; Drum
- Position: Rear
- Replaces: 5105617AB, 68032618AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Sebring | Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Drum, Rear Part Number: MB895659
Product Specifications
- Other Name: Drum - Brake; Brake Drum, Rear; Drum, Rear Brake (9'); Drum Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005, 1995-1999 Chrysler Sebring | Base, LX, LXi, Limited | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Drum, Rear Part Number: 4779286AA
Product Specifications
- Other Name: Drum - Brake; Brake Drum, Rear; Drum Brake; Brake Drum
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Drum, Rear Part Number: 4509676
Product Specifications
- Other Name: Drum - Brake; Brake Drum, Rear; Drum Assembly, Rear Wheel Brake; Drum Brake; Brake Drum
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS

Chrysler Sebring Brake Drum

Choose OEM Brake Drum that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Brake Drum follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

This part is the actual brake drum that is found in the brake system of different models of Chrysler Sebring especially those utilizing rear drum breaks. The Chrysler Sebring Brake Drum is a product that has been known to provide maximum reliability and performance; Made from a particular type of cast iron to improve the heat conductivity in the brake drum that will afford the brake drum longer life under stressful situations. It can be seen that when the brakes are engaged the brake lining applies force in radial direction to the interior of the rotating drum so as to produce adequate friction for the purpose of slowing the car. This process also forms a minor part of the efficiency improvement of the Chrysler Sebring with the major responsibility being assigned on the safety of the passengers in the car. The Chrysler Sebring Brake Drum is available in many models of sebring, and its mechanism is pretty standard, delivering superior brake functionality to the cars. However, its design has been continuously developed in parallel with the Chrysler Sebring; with enhancements in technologies used and the standards in car safety. However, the Chrysler Sebring Brake Drum has captured the attention of consumers in the automobile market because of it hard wearing and very capable of coping with a ton of heating during its usage making it a perfect car model for those people who are in search of a hot performing yet safe vehicle. Being a component that significantly helped in improving both the efficiency and safety of the Chrysler Sebring or what we know today as the Chrysler 200, The Brake Drum is still one of the critical components that is present in this ever-green car model.

Chrysler Sebring Brake Drum Parts and Q&A

Brake Drum, Rear
5105617AC
Q: How to Remove and Replace a Brake Drum on Chrysler Sebring?
A:
Raise the car, undo the wheel mounting nuts, take off the tire and wheel and then you can remove the brake drum. Slide the brake drum free from the mounting studs of the hub and bearing. Should the drum not come loose, loosen the brake adjuster screw by taking out the grey plug from below the Wheel Cylinder. Put a small screwdriver through the hole in the support plate, down under the adjuster and against the lever pawl that connects to and swivels with the back brake shoe. With the push of a screwdriver on the pawl, rotate the wheel upward to loosen the brake by using either another screwdriver or a specific adjustment tool made for brakes. After the adjuster screw is listed, drive the drum off of the wheel mounting studs.
Drum, Rear
4509676
Q: How to Maintain and Fix a Brake Drum on Chrysler Sebring?
A:
For parking brake drum maintenance, lift out the rear brake assembly and prop it up with wire or something similar. Following that, insert the shoe and lining assembly deeper to take out the shoe hold-down cup. Attach the adjuster so that the shoe adjusting bolt of the left-hand wheel is positioned toward the front of the car and the one on the right is near the rear when installing the device. There are different loads on the shoe-to-anchor springs and their colors help you tell them apart; the right wheel is lined up with the left. While inspecting, measure the thickness of the brake lining a few times and if it is below 1.0 mm (0.039 inch), replacement is required. Apart from that, take the inner diameter measurements of the brake disc drum with a dial gauge caliper or micrometer at two or more places, with a standard of 168.0 mm (6.6 inch) and upper limit of 169.0 mm (6.7 inch); if this value is reached or exceeded, you should replace the drum.