How to Service a Camshaft Position Sensor on 2006 Chrysler Town & Country?

To service the Camshaft Position Sensor, remove the negative battery cable and remove the air box cover. Disconnect the sensor, remove the bolt from the sensor and pull it out of the chain case cover. Clean and replace spacers and O-rings as required. Reinstall the sensor, tighten the bolt and reconnect everything.

OEM 2006 Chrysler Town & Country Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2006 Chrysler Town & Country Camshaft Position Sensor Part Number: 4686353
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Positioni Sensor; Camshaft Sensor; Cam Sensor; Sensor D.I.S. Camshaft Reference; Sensor Camshaft
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.6 x 3.4 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4686353
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, SX, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2006 Chrysler Town & Country Camshaft Position Sensor Parts and Q&A

Q: How to Service a Camshaft Position Sensor on 2006 Chrysler Town & Country?
A: To service the Camshaft Position Sensor, remove the negative battery cable and remove the air box cover. Disconnect the sensor, remove the bolt from the sensor and pull it out of the chain case cover. Clean and replace spacers and O-rings as required. Reinstall the sensor, tighten the bolt and reconnect everything.