How to Install a Camshaft Position Sensor on a 4.0L Engine on Chrysler Town & Country?

To put in the CMP sensor for the 4.0L, position it correctly and then fasten it in place using a bolt, with a torque of 12 Nm (9 ft. lbs.). After that, link the electrical connector to the CMP sensor. After that, place the generator on the mounting bolts and make sure it is both straight and firmly attached. Before you finish, link the negative battery cable and tighten it firmly to 5 Nm (45 in. lbs.).

How to Service a Camshaft Position Sensor on Chrysler Town & Country?

The first step to servicing the Camshaft Position Sensor is to first disconnect the negative battery cable. Carefully lift out the air box cover and take out the inlet tube from the engine. Remove the electrical connection of the camshaft position sensor from the wiring harness, then loosen and take out the holding bolt. Rotate the sensor out of the way and then gently lift it up and out of the chain case cover. If this is not the first installation, detach the old spacer from the sensor face and add on a new one before installing the sensor. Check the O-ring for signs of damage and put in a new O-ring if the old one is damaged. When inserting the new sensor, fix the paper spacer to the face and place the O-ring in the sensor's groove. Coat the O-ring with a little clean engine oil and then fit the sensor into the chain case cover and spin it into position. Press the sensor onto the camshaft gear, keep it in place and fasten the bolt while tightening it to 14 N.m (125 in. lbs.) Attach the camshaft position sensor cable to the harness connector, place the air box cover as well as the inlet hose back in place and link the negative battery cable the last step.

OEM Chrysler Town & Country Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Camshaft Position Sensors found

View related parts
Chrysler Town & Country Camshaft Position Sensor Part Number: 5149141AF
$100.44 MSRP: $148.00
You Save: $47.56 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Position Sensor; Cam Sensor; Sensor Camshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Town & Country Camshaft Position Sensor Part Number: 5149078AD
$163.52 MSRP: $226.00
You Save: $62.48 (28%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Cam Sensor; Sensor Camshaft
- Replaces: 5149078AB, 5149078AA, 5149078AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | LX, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Camshaft Position Sensor Part Number: 4686353
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Positioni Sensor; Camshaft Sensor; Cam Sensor; Sensor D.I.S. Camshaft Reference; Sensor Camshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2007 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, SX, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Crankshaft Position Sensor Part Number: 5029808AD
Product Specifications
- Other Name: Engine Camshaft Position Sensor; Camshaft Position Sensor; Sensor Camshaft
- Replaces: 68013184AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | Limited, Touring, Touring Plus | 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Camshaft Position Sensor Part Number: 4727138AB
Product Specifications
- Other Name: Sensor - D.I.S. Camshaft Reference; Camshaft Sensor; Sensor D.I.S. Camshaft Reference
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chrysler Town & Country | Base, LX, LXi | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

Chrysler Town & Country Camshaft Position Sensor

Choose OEM Camshaft Position Sensor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Camshaft Position Sensor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Town & Country matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Town & Country parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Camshaft Position Sensor in Chrysler Town & Country is one of the vital components that determine the position and speed of the camshaft and the required information is forwarded to the engine control module to control the injectors of fuel and the timings of ignition. Usually installed on the head of the camshaft but depending on a certain car model, its location may be different. Complemented by the crank sensor, the Camshaft Position Sensor assists in coordinating some of the engine parts to run as planned, particularly in the mechanism of fuel injection and control of engine speed. A vehicle problem associated with the Camshaft Position Sensor can result to a ill performing engine, the reason why car owners should consider having their vehicle checked and serviced.

Chrysler Town & Country Camshaft Position Sensor Parts and Q&A

Camshaft Position Sensor
5149078AD
Q: How to Install a Camshaft Position Sensor on a 4.0L Engine on Chrysler Town & Country?
A:
To put in the CMP sensor for the 4.0L, position it correctly and then fasten it in place using a bolt, with a torque of 12 Nm (9 ft. lbs.). After that, link the electrical connector to the CMP sensor. After that, place the generator on the mounting bolts and make sure it is both straight and firmly attached. Before you finish, link the negative battery cable and tighten it firmly to 5 Nm (45 in. lbs.).
Camshaft Position Sensor
4686353
Q: How to Service a Camshaft Position Sensor on Chrysler Town & Country?
A:
The first step to servicing the Camshaft Position Sensor is to first disconnect the negative battery cable. Carefully lift out the air box cover and take out the inlet tube from the engine. Remove the electrical connection of the camshaft position sensor from the wiring harness, then loosen and take out the holding bolt. Rotate the sensor out of the way and then gently lift it up and out of the chain case cover. If this is not the first installation, detach the old spacer from the sensor face and add on a new one before installing the sensor. Check the O-ring for signs of damage and put in a new O-ring if the old one is damaged. When inserting the new sensor, fix the paper spacer to the face and place the O-ring in the sensor's groove. Coat the O-ring with a little clean engine oil and then fit the sensor into the chain case cover and spin it into position. Press the sensor onto the camshaft gear, keep it in place and fasten the bolt while tightening it to 14 N.m (125 in. lbs.) Attach the camshaft position sensor cable to the harness connector, place the air box cover as well as the inlet hose back in place and link the negative battery cable the last step.