Other Name: Pad - Heater; Seat Heater Pad, Front Right, Front Right Lower; Element; Pad Heater Seat Cushion; Pad Heater Cushion; Seat Heater
Position: Front Passenger Side
Replaces: 5189822AA
Item Weight: 0.60 Pounds
Item Dimensions: 10.5 x 6.3 x 6.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5000048AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Dodge Dakota Submodels:
Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
2006 Dodge Dakota Seat Heater Parts and Q&A
Q: How to Maintain a Seat Heater on 2006 Dodge Dakota?
A: Before handling the seat heater, disconnect and separate the negative part of the battery cable. Upon choosing the seat, eliminate the connected seat cushion or seat back trim cover and remove the electricity plugs from the non-working heated seat cushion or seat back piece. Tighten your pliers where the attached wires connect to the heating element and cut into the wire with a utility knife. First, remove the adhesive backing on the created heating element and then stick it over the factory installed heating element. Be attentive not to fold or crease the assembly, so that the result lasts for as long as possible. Connect the heated seat element electrical connectors up next, reconnect the battery cable of the negative terminal and verify that the heated seat system works fine. After that, put on the proper seat backrest or cushion cover, ensuring the seat wire harness is routed properly and that all extra wire is hidden between the rear of the foam seat cushion and the back of the carpet trim cover.