How to Maintain the Seat Switch on 2006 Dodge Dakota?

Service of the power seat switch should begin with the disconnection of the battery negative cable. Take out the screw that is holding the recliner lever to the recliner mechanism release shaft on the outboard side of the driver side front seat cushion side shield. Take off the release lever on top of the recliner, then loosen and take out the two screws that attach the driver side seat cushion side shield to the outboard seat cushion frame. Pull the side shield back from the seat cushion and disconnect the power seat switch assembly wire harness connector. Pull out the whole power seat switch module along with the side shield, unscrew the two screws on the inside of the side shield and remove the switch. Fit the power seat switch to the back of the seat cushion side shield, attach it with two screws, get the wire harness connector back and put the side shield and power seat switch assembly on the seat frame. Place the cushion grip side shield screws, attach the recliner button into the release mechanism, secure it with the screw and at last reconnect the negative battery cable.

OEM 2006 Dodge Dakota Seat Switch

Seat Adjust Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Seat Switches found

View related parts
2006 Dodge Dakota Seat Switch, Center Driver Side Part Number: 56040688AF
$69.80 MSRP: $106.00
You Save: $36.20 (35%)
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Center Right, Center Left, Front Right, Front Left, Rear Right, Left.; Seat Heat Switch; Switch
- Position: Center Driver Side
- Replaces: 56040688AE, 56040688AD
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56040688AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2006 Dodge Dakota Seat Switch, Rear Driver Side Part Number: 56040639AF
$68.68 MSRP: $95.30
You Save: $26.62 (28%)
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Heater Switch (Ctr R/L, Frt R/L, Rear L, Rt), Power Switch (Left); Seat Heat Switch; Switch
- Position: Rear Driver Side
- Replaces: 56040639AD, 56040639AE
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56040639AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2006 Dodge Dakota Control Switch Part Number: 4373848
Product Specifications
- Other Name: Switch - Power Seat; Power Seat Switch; Seat Switch; Switch; Seat Adjuster (Bucket); Switch, Power Adjuster; Switch Power Seat; Seat Adjuster
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.2 x 4.2 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4373848
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2006 Dodge Dakota Seat Switch Parts and Q&A

Q: How to Maintain the Seat Switch on 2006 Dodge Dakota?
A: Service of the power seat switch should begin with the disconnection of the battery negative cable. Take out the screw that is holding the recliner lever to the recliner mechanism release shaft on the outboard side of the driver side front seat cushion side shield. Take off the release lever on top of the recliner, then loosen and take out the two screws that attach the driver side seat cushion side shield to the outboard seat cushion frame. Pull the side shield back from the seat cushion and disconnect the power seat switch assembly wire harness connector. Pull out the whole power seat switch module along with the side shield, unscrew the two screws on the inside of the side shield and remove the switch. Fit the power seat switch to the back of the seat cushion side shield, attach it with two screws, get the wire harness connector back and put the side shield and power seat switch assembly on the seat frame. Place the cushion grip side shield screws, attach the recliner button into the release mechanism, secure it with the screw and at last reconnect the negative battery cable.