How to Service the Front Brake Line on 2006 Dodge Durango?

You should lift the vehicle, support it, remove the tire assembly and then access the brake hose. Separate brake line 1 from brake hose 2 connected to the frame, then remove brake line 1 and the retaining clip from hose 3 and the frame. After that, disconnect the clip from brake hose 2 and remove the banjo bolt at the caliper before you remove the hose. When installing, place brake hose 2 and fasten the retaining clip for brake hose 3 to the frame. Push brake line 1 onto brake hose 2 and tighten it to 19 Nm (170 inch lbs.) and thread the brake hose banjo bolt into the caliper and tighten it to 18 Nm (155 inch lbs.). After that, eliminate the support, slowly lower the vehicle and bleed the brake lines.

OEM 2006 Dodge Durango Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Lines found

View related parts
2006 Dodge Durango Flex Hose, Front Driver Side Part Number: 52010491AC
$6.19 MSRP: $7.85
You Save: $1.66 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Line, Front Left; Hydraulic Hose; Brake Hose; Brake Line; Hose Brake
- Position: Front Driver Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 17.5 x 4.3 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52010491AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Flex Hose, Front Driver Side Part Number: 52010491AD
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Hose, Front Left; Brake Hydraulic Line, Front Left; Brake Hose; Brake Line; Hose And Tube Assembly Brake Left Front; Hose Brake; Hydraulic Hose
- Position: Front Driver Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 19.6 x 8.3 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52010491AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Flex Hose, Front Passenger Side Part Number: 52010484AC
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Line, Front Right; Hydraulic Hose; Brake Hose; Brake Line; Hose Brake
- Position: Front Passenger Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 22.9 x 8.3 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52010484AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Flex Hose, Front Passenger Side Part Number: 52010484AD
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hose And Tube Assembly Brake Right Front; Hose Brake; Hydraulic Hose
- Position: Front Passenger Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 11.2 x 8.1 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52010484AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Flex Hose, Rear Driver Side Part Number: 52855381AA
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Line, Rear Right/Left; Rear Brake Hose; Brake Line; Hose And Tube Assembly Brake Rear; Hose Brake; Hydraulic Hose
- Position: Rear Driver Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 18.3 x 6.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52855381AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2006 Dodge Durango Brake Line Parts and Q&A

Q: How to Service the Front Brake Line on 2006 Dodge Durango?
A: You should lift the vehicle, support it, remove the tire assembly and then access the brake hose. Separate brake line 1 from brake hose 2 connected to the frame, then remove brake line 1 and the retaining clip from hose 3 and the frame. After that, disconnect the clip from brake hose 2 and remove the banjo bolt at the caliper before you remove the hose. When installing, place brake hose 2 and fasten the retaining clip for brake hose 3 to the frame. Push brake line 1 onto brake hose 2 and tighten it to 19 Nm (170 inch lbs.) and thread the brake hose banjo bolt into the caliper and tighten it to 18 Nm (155 inch lbs.). After that, eliminate the support, slowly lower the vehicle and bleed the brake lines.