How to Service and Repair the Relay Block on 2006 Dodge Durango?

The first thing to do for Relay Box Junction Block service or repair is to unhook and remove the battery negative cable. After that, take away the cowl trim cover and the three fasteners holding it. Take off the electrical harness plugs and take out Junction Block 1, moving parts where necessary. For installation, hook up the wire harness connectors to Junction Block JB 1, put the Junction Block in place and use the three mounting fasteners. In the end, put on the cowl trim cover and link the battery negative cable back to the system.

OEM 2006 Dodge Durango Relay Block

Relay Fuse Box

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Relay Block found

View related parts
2006 Dodge Durango Junction Block Part Number: 56049173AF
Product Specifications
- Other Name: Block - Relay; Junction Boxes; Fuse Box; Junction Block Relay
- Item Weight: 3.00 Pounds
- Item Dimensions: 14.1 x 9.4 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56049173AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Dodge Durango Relay Block Parts and Q&A

Q: How to Service and Repair the Relay Block on 2006 Dodge Durango?
A: The first thing to do for Relay Box Junction Block service or repair is to unhook and remove the battery negative cable. After that, take away the cowl trim cover and the three fasteners holding it. Take off the electrical harness plugs and take out Junction Block 1, moving parts where necessary. For installation, hook up the wire harness connectors to Junction Block JB 1, put the Junction Block in place and use the three mounting fasteners. In the end, put on the cowl trim cover and link the battery negative cable back to the system.