How to Maintain a Seat Heater Switch on 2006 Dodge Durango?

Before servicing the heated seat, you should first unconnect and disconnect the battery negative cable. Take the center bezel off the instrument cluster, then lift out the heated switch bezel with both switches attached. Ease the switch out of the heated seat switch bezel from the back and then work the heated seat switch through the rear of the bezel. Before installation, confirm that the heated seat switches fit securely in the right holes of the heated seat switch bezel because the correct positions are specified by a keyway on the back of each switch. Press the button that heats the seat from behind the bezel, snap the center bezel into place on the instrument panel, reattach the battery negative cable and check that the heating system works.

OEM 2006 Dodge Durango Seat Heater Switch

Seat Heater Level Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heater Switches found

View related parts
2006 Dodge Durango Seat Switch, Center Passenger Side Part Number: 56045626AB
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Center Right, Right; Switch; Switch Heated Seat; Seat Heater Switch
- Position: Center Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.5 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56045626AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Seat Switch, Driver Side Part Number: 56045625AB
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Center Left, Left; Switch; Switch Heated Seat; Seat Heater Switch
- Position: Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.8 x 2.7 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56045625AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2006 Dodge Durango Seat Heater Switch Parts and Q&A

Q: How to Maintain a Seat Heater Switch on 2006 Dodge Durango?
A: Before servicing the heated seat, you should first unconnect and disconnect the battery negative cable. Take the center bezel off the instrument cluster, then lift out the heated switch bezel with both switches attached. Ease the switch out of the heated seat switch bezel from the back and then work the heated seat switch through the rear of the bezel. Before installation, confirm that the heated seat switches fit securely in the right holes of the heated seat switch bezel because the correct positions are specified by a keyway on the back of each switch. Press the button that heats the seat from behind the bezel, snap the center bezel into place on the instrument panel, reattach the battery negative cable and check that the heating system works.