How to Service and Repair Brake Calipers for Rear LD and HD on 2006 Dodge Ram 1500?

After elevating the vehicle and placing it on stands, you should next remove the tire and wheel assembly from the rear LD and HD brake calipers. Remove a little brake fluid from the master cylinder reservoir using a suction gun. Once that's complete, remove the brake hose banjo bolt and dispose of the copper washers if you are replacing the caliper. Loose the slide bolts that secure the caliper and remove the caliper from the car. Coat the caliper slide pin bolts with silicone grease, insert the caliper into the caliper adapter and then tighten to 30 Nm (22 ft. lbs.). Place the brake hose banjo bolt back if you removed it, connect the hose to the caliper with fresh seal washers and tighten its bolt to 27 Nm (245 inch lbs.), making certain the hose is without twists or kinks. Drain the base brake system, then fit back the wheel and tire assemblies, take off the supports and lower the whole vehicle. Don't forget to ensure the brake is working just before trying to move the vehicle forward.

OEM 2006 Dodge Ram 1500 Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Brake Calipers found

View related parts
2006 Dodge Ram 1500 Caliper, Rear Driver Side Part Number: 5104759AA
$348.50 MSRP: $513.00
You Save: $164.50 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Caliper Assembly Disc Brake Rear; Caliper Disc Brake; Brake Caliper
- Position: Rear Driver Side
- Item Weight: 13.10 Pounds
- Item Dimensions: 6.0 x 10.6 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5104759AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 Caliper, Front Passenger Side Part Number: 5093266AA
$157.91 MSRP: $232.00
You Save: $74.09 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Right; Caliper Assembly Disc Brake Front; Caliper Disc Brake; Brake Caliper
- Position: Front Passenger Side
- Item Weight: 15.20 Pounds
- Item Dimensions: 10.1 x 7.8 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093266AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 Caliper, Front Passenger Side Part Number: 5143348AC
$53.43 MSRP: $76.20
You Save: $22.77 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Right; Caliper Disc Brake; Brake Caliper
- Position: Front Passenger Side
- Item Weight: 11.50 Pounds
- Item Dimensions: 12.3 x 6.0 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143348AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 Caliper, Rear Passenger Side Part Number: 5179880AE
$154.61 MSRP: $230.00
You Save: $75.39 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Brake Caliper
- Position: Rear Passenger Side
- Replaces: 5080560AA, 5179880AC, 5179880AB, 5179880AA, 5179880AD
- Item Weight: 7.20 Pounds
- Item Dimensions: 10.0 x 7.8 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5179880AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS, 8.3L V10
View related parts
2006 Dodge Ram 1500 Caliper Clip, Rear Driver Side Part Number: 5179881AE
$113.35 MSRP: $169.00
You Save: $55.65 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Disc Brake Hardware Kit; Brake Caliper; Caliper
- Position: Rear Driver Side
- Replaces: 5179881AA, 5179881AC, 5179881AB, 5179881AD
- Item Weight: 7.20 Pounds
- Item Dimensions: 10.1 x 7.6 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5179881AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS, 8.3L V10
View related parts
2006 Dodge Ram 1500 Caliper, Front Driver Side Part Number: 5143358AC
$42.53 MSRP: $60.50
You Save: $17.97 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left; Caliper Disc Brake; Brake Caliper
- Position: Front Driver Side
- Item Weight: 11.40 Pounds
- Item Dimensions: 12.3 x 6.1 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143358AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 Caliper, Front Driver Side Part Number: 5093269AA
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left; Caliper Assembly Disc Brake Front; Caliper Disc Brake; Brake Caliper
- Position: Front Driver Side
- Item Weight: 14.30 Pounds
- Item Dimensions: 5.2 x 7.7 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093269AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 Caliper, Rear Passenger Side Part Number: 5104758AA
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Caliper Assembly Disc Brake Rear; Caliper Disc Brake; Brake Caliper
- Position: Rear Passenger Side
- Item Weight: 12.80 Pounds
- Item Dimensions: 6.6 x 6.4 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5104758AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 Caliper, Front Driver Side Part Number: 5143407AA
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left; Caliper Disc Brake; Brake Caliper
- Position: Front Driver Side
- Item Weight: 25.80 Pounds
- Item Dimensions: 15.0 x 9.4 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143407AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 Caliper, Front Passenger Side Part Number: 5143398AA
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Right; Caliper Disc Brake; Brake Caliper
- Position: Front Passenger Side
- Item Weight: 24.30 Pounds
- Item Dimensions: 14.2 x 9.3 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143398AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 Caliper, Rear Driver Side Part Number: 5139915AA
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Caliper Disc Brake; Brake Caliper
- Position: Rear Driver Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5139915AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Dodge Ram 1500 Submodels:
- SRT-10 | 10 Cyl 8.3 L GAS
View related parts
2006 Dodge Ram 1500 Caliper, Rear Passenger Side Part Number: 5139914AA
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Caliper Disc Brake; Brake Caliper
- Position: Rear Passenger Side
- Item Weight: 13.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5139914AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- SRT-10 | 10 Cyl 8.3 L GAS

2006 Dodge Ram 1500 Brake Caliper Parts and Q&A

Q: How to Service and Repair Brake Calipers for Rear LD and HD on 2006 Dodge Ram 1500?
A: After elevating the vehicle and placing it on stands, you should next remove the tire and wheel assembly from the rear LD and HD brake calipers. Remove a little brake fluid from the master cylinder reservoir using a suction gun. Once that's complete, remove the brake hose banjo bolt and dispose of the copper washers if you are replacing the caliper. Loose the slide bolts that secure the caliper and remove the caliper from the car. Coat the caliper slide pin bolts with silicone grease, insert the caliper into the caliper adapter and then tighten to 30 Nm (22 ft. lbs.). Place the brake hose banjo bolt back if you removed it, connect the hose to the caliper with fresh seal washers and tighten its bolt to 27 Nm (245 inch lbs.), making certain the hose is without twists or kinks. Drain the base brake system, then fit back the wheel and tire assemblies, take off the supports and lower the whole vehicle. Don't forget to ensure the brake is working just before trying to move the vehicle forward.