Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2006 Dodge Stratus ABS Control Module

Anti Lock Brake Control Module
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

  • 2006 Dodge Stratus ABS Control Module - 5142283AA
    2006 Dodge Stratus ABS Control Module - 5142283AA
    2006 Dodge Stratus ABS Control Module Diagram - 5142283AA
    View related parts

    2006 Dodge Stratus Modulator Valve Part Number: 5142283AA

    Product Specifications
    • Other Name: HCU - ABS; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Modulator; Hydraulic Control Unit Anti-Lock Brake System
    • Item Weight: 5.20 Pounds
    • Item Dimensions: 8.3 x 6.1 x 5.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5142283AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2006 Dodge Stratus Submodels:
    • R/T, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
  • 2006 Dodge Stratus ABS Control Module - 5159191AB
    2006 Dodge Stratus ABS Control Module Diagram - 5159191AB
    View related parts

    2006 Dodge Stratus Control Module Part Number: 5159191AB

    Product Specifications
    • Other Name: Control - Anti-Lock Brakes; ABS Control Module; ABS Control Unit; Module Anti-Lock Brakes
    • Item Weight: 2.30 Pounds
    • Item Dimensions: 6.2 x 6.1 x 5.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5159191AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2006 Dodge Stratus Submodels:
    • R/T, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2006 Dodge Stratus ABS Control Module Parts and Q&A

  • Q: How to Service the ABS Control Module on 2006 Dodge Stratus?
    A: Before servicing the Electronic Brake Control Module, take off the negative cable and lift the car. Raise up on the connector lock to disconnect the 24-way electrical connector and the pump/motor connector from the Cab. Take out the bolts holding the integrated control unit mounting bracket to the lower radiator support, then move the Icu toward the right side of the car so as not to bend the brake tubes linked to it. Loose the screws and take out the Cab from the part of the Icu that holds the Hcu. Use screws and tighten them to a torque of 2 Nm (17 inch lbs.) and attach the Cab to the half of the Icu closest to the Hcu during installation. Replace the Icu mounting bracket on the lower radiator support and tighten all the bolts to 28 Nm (21 ft. lbs.). Attach the 24-way electrical and pump/motor connectors, drop the vehicle down and change the negative battery cable. After that, link a Drbiii(R) to the car and start the initialization process.

Related 2006 Dodge Stratus Parts

Alternate Year Models

+
2005 Dodge Stratus ABS Control Module