How to Locate, Remove, and Reinstall a Fuel Pump Relay on 2006 Jeep Commander?

The PDC cover has a label and the fuel pump relay is inside the PDC near the label. Take off the PDC cover and then take out the relay from the PDC. Check both the relay terminals and the PDC connector terminals for signs of damage or corrosion and handle the situation by either repairing or replacing them ahead of putting in the relay. Furthermore, checking that all pin heights are uniform in the PDC connector is necessary, so you will know what to fix whenever needed. Return the relay to the PDC and then attach the PDC cover in order to install it.

OEM 2006 Jeep Commander Fuel Pump Relay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Relay found

View related parts
2006 Jeep Commander Fuel Pump Relay, Rear Part Number: 4727370AA
$26.96 MSRP: $39.90
You Save: $12.94 (33%)
ADD TO CART
Product Specifications
- Other Name: Relay - Mini; PCM Relay; Fan Relay; Accessory Relay(F/R); A/C Clutch; Starter; Fog Light; Fan Relay; Blower Motor Relay; Oxygen Sensor Relay; Mini 5 Terminal Square Relay.
- Position: Rear
- Replaces: 56006707, 56006709, 4848879AB, 4638094, 68369406AA, 68223712AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 1.4 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4727370AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Jeep Commander Fuel Pump Relay Parts and Q&A

Q: How to Locate, Remove, and Reinstall a Fuel Pump Relay on 2006 Jeep Commander?
A: The PDC cover has a label and the fuel pump relay is inside the PDC near the label. Take off the PDC cover and then take out the relay from the PDC. Check both the relay terminals and the PDC connector terminals for signs of damage or corrosion and handle the situation by either repairing or replacing them ahead of putting in the relay. Furthermore, checking that all pin heights are uniform in the PDC connector is necessary, so you will know what to fix whenever needed. Return the relay to the PDC and then attach the PDC cover in order to install it.