How to service and repair a Rear Door Striker on 2006 Jeep Commander?

You should first use a grease pencil or an equivalent to mark the place on the c-pillar where the rear door latch striker 2 is found. Then, remove the two bolts at position 1 that hold the striker to the c-pillar and take out the striker. Set the door latch strike 2 onto the c-pillar and loosely secure the bolts 1 until installation is finished. Following the marks made during removal, place the door latch striker against the c-pillar and tighten the bolts to 28 N.m (21 ft.lbs).

OEM 2006 Jeep Commander Rear Door Striker

Rear Door Latch Striker

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Rear Door Strikers found

View related parts
2006 Jeep Commander Striker, Rear Part Number: 4717779AC
$11.16 MSRP: $13.80
You Save: $2.64 (20%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Striker - Door Latch; Door Lock Striker Plate, Front, Rear; Striker And Bumper Door Latch
- Position: Rear
- Replaces: 4717779AB
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.2 x 3.2 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4717779AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Striker, Rear Part Number: 55364520AA
$20.82 MSRP: $29.95
You Save: $9.13 (31%)
Product Specifications
- Other Name: Striker - Liftgate; Liftgate Lock Striker Plate, Rear; Striker Liftgate
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.8 x 2.1 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55364520AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Jeep Commander Rear Door Striker Parts and Q&A

Q: How to service and repair a Rear Door Striker on 2006 Jeep Commander?
A: You should first use a grease pencil or an equivalent to mark the place on the c-pillar where the rear door latch striker 2 is found. Then, remove the two bolts at position 1 that hold the striker to the c-pillar and take out the striker. Set the door latch strike 2 onto the c-pillar and loosely secure the bolts 1 until installation is finished. Following the marks made during removal, place the door latch striker against the c-pillar and tighten the bolts to 28 N.m (21 ft.lbs).