How to Service and Repair a Window Regulator for the Rear Door on 2006 Jeep Commander?

Removing the watershield should be the first step when servicing and repairing the rear door window regulator. For now, put in the window switch and raise the glass all the way up to get to the glass clamp screws, then use tape to hold the glass in place. Gently turn the bolt in each glass clamp just so that the door glass comes out, but don't remove them. After that, take out bolts 1 and 4 and remove connection 3 from the rail in the door interior. Turn the regulator down and pick it out of the door. Install the regulator in the rear door by putting it where we fitted the regulator previously. Connect the wire harness connector 3 to the regulator motor. Set the glass in the regulator clamps and screw in bolts 1 and 2 to attach the regulator rails to the door, making sure they're tightened to 8.5 N.m (75 in. lbs.). Take off the tape keeping the door glass in its highest place, add the window switch for now and lift the glass to its highest point. Once you have tightened all the bolts in the window regulator glass clamp to 12 N.m, put the watershield and trim panel back onto the front door's inside, then install watershield 1.

OEM 2006 Jeep Commander Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Window Regulators found

View related parts
2006 Jeep Commander Window Regulator, Front Driver Side Part Number: 55396481AE
$115.57 MSRP: $170.00
You Save: $54.43 (33%)
ADD TO CART
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Left
- Position: Front Driver Side
- Replaces: 55396481AB, 55396481AD, 55396481AC
- Item Weight: 5.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396481AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Window Regulator, Rear Passenger Side Part Number: 55396482AF
Product Specifications
- Other Name: Regulator - Rear Door Window; Window Regulator, Rear Right
- Position: Rear Passenger Side
- Replaces: 55396482AB, 55396482AC, 55396482AD
- Item Weight: 4.50 Pounds
- Item Dimensions: 28.9 x 15.9 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396482AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Window Regulator, Front Passenger Side Part Number: 55396480AE
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Right
- Position: Front Passenger Side
- Replaces: 55396480AD, 55396480AB, 55396480AC
- Item Weight: 5.60 Pounds
- Item Dimensions: 33.0 x 25.2 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396480AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Window Regulator, Rear Driver Side Part Number: 55396483AF
Product Specifications
- Other Name: Regulator - Rear Door Window; Window Regulator, Rear Left
- Position: Rear Driver Side
- Replaces: 55396483AB, 55396483AD, 55396483AC
- Item Weight: 4.10 Pounds
- Item Dimensions: 25.3 x 14.7 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396483AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Jeep Commander Window Regulator Parts and Q&A

Q: How to Service and Repair a Window Regulator for the Rear Door on 2006 Jeep Commander?
A: Removing the watershield should be the first step when servicing and repairing the rear door window regulator. For now, put in the window switch and raise the glass all the way up to get to the glass clamp screws, then use tape to hold the glass in place. Gently turn the bolt in each glass clamp just so that the door glass comes out, but don't remove them. After that, take out bolts 1 and 4 and remove connection 3 from the rail in the door interior. Turn the regulator down and pick it out of the door. Install the regulator in the rear door by putting it where we fitted the regulator previously. Connect the wire harness connector 3 to the regulator motor. Set the glass in the regulator clamps and screw in bolts 1 and 2 to attach the regulator rails to the door, making sure they're tightened to 8.5 N.m (75 in. lbs.). Take off the tape keeping the door glass in its highest place, add the window switch for now and lift the glass to its highest point. Once you have tightened all the bolts in the window regulator glass clamp to 12 N.m, put the watershield and trim panel back onto the front door's inside, then install watershield 1.