Other Name: Switch - Window And Door Lock; Door Window Switch, Front Left; Switch Window And Door Lock; Switch Power Window; Door Window Switch
Position: Front Driver Side
Replaces: 4602736AA
Item Weight: 0.80 Pounds
Item Dimensions: 2.7 x 2.8 x 6.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4602781AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
2006 Jeep Commander Door Lock Switch Parts and Q&A
Q: How to Maintain the Door Lock Switch on 2006 Jeep Commander?
A: To work on the power door lock switch, you need to remove and isolate the battery's negative link first. Pry up the switch with a trim stick at the back, remove it from the door and then unplug the electrical harness from it. Once installation is ready, slot the electrical harness connectors into the switch, place the front end of the switch into the door trim panel opening and press it there.