How to Service and Repair a Rear Door Latch Assembly on 2006 Jeep Commander?

Service and repair of the rear door latch start by removing the watershield. Remove the integral rods from the door's exterior handle and interior handle by disconnecting them from the latch. After that, unhook the door wire harness connector from the rear door latch and undo the three screws that hold the latch to the door, removing the latch and rods together. If you have to, disconnect all the actuator rods from the actuator. Once the rods are installed, fasten the retainers to the latch on the back door. Make sure the lock knob rod goes through the inner door panel opening as you fit the rear door latch and actuator rods together into the door. Use three bolts to make sure the rear door latch is secure, ensuring the torque is set at 10.5 N.m (95 in.lbs). Connect one side of the door wire harness plug to the rear door latch, install the rod from the interior handle actuator onto the latch, attach the retainer and match the rod to the rear outside door handle. After that, fit the watershield on the door behind and secure it with the rear door latch.

OEM 2006 Jeep Commander Door Latch Assembly

Door Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Door Latch Assemblys found

View related parts
2006 Jeep Commander Lock Actuator, Front Driver Side Part Number: 55113369AB
$167.33 MSRP: $251.00
You Save: $83.67 (34%)
ADD TO CART
Product Specifications
- Other Name: Latch - Front Door; Door Latch Assembly, Front Left; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Front Driver Side
- Replaces: 55369091AC, 55369091AD, 55369091AB, 55113369AA
- Item Weight: 2.20 Pounds
- Item Dimensions: 22.7 x 6.4 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55113369AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Lock Actuator, Front Passenger Side Part Number: 55113374AB
Product Specifications
- Other Name: Latch - Front Door; Door Latch Assembly, Front Right; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Front Passenger Side
- Replaces: 55396530AD, 55396530AC, 55396530AB, 55113374AA
- Item Weight: 2.30 Pounds
- Item Dimensions: 22.6 x 6.2 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55113374AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Lock Actuator, Rear Passenger Side Part Number: 55113380AB
Product Specifications
- Other Name: Latch - Rear Door; Rear Right Door Latch Assembly; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Rear Passenger Side
- Replaces: 55113380AA, 55396532AB, 55396532AD, 55396532AC
- Item Weight: 2.40 Pounds
- Item Dimensions: 23.0 x 6.0 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55113380AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Lock Actuator, Rear Driver Side Part Number: 55113381AB
Product Specifications
- Other Name: Latch - Rear Door; Rear Left Door Latch Assembly; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Rear Driver Side
- Replaces: 55396533AD, 55396533AB, 55113381AA, 55396533AC
- Item Weight: 2.40 Pounds
- Item Dimensions: 22.3 x 6.0 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55113381AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Jeep Commander Door Latch Assembly Parts and Q&A

Q: How to Service and Repair a Rear Door Latch Assembly on 2006 Jeep Commander?
A: Service and repair of the rear door latch start by removing the watershield. Remove the integral rods from the door's exterior handle and interior handle by disconnecting them from the latch. After that, unhook the door wire harness connector from the rear door latch and undo the three screws that hold the latch to the door, removing the latch and rods together. If you have to, disconnect all the actuator rods from the actuator. Once the rods are installed, fasten the retainers to the latch on the back door. Make sure the lock knob rod goes through the inner door panel opening as you fit the rear door latch and actuator rods together into the door. Use three bolts to make sure the rear door latch is secure, ensuring the torque is set at 10.5 N.m (95 in.lbs). Connect one side of the door wire harness plug to the rear door latch, install the rod from the interior handle actuator onto the latch, attach the retainer and match the rod to the rear outside door handle. After that, fit the watershield on the door behind and secure it with the rear door latch.