What Are the Best Practices for Maintaining Battery Cables on 2006 Jeep Liberty?

First, check that the ignition is in Off and all connections to electrical accessories are turned off. Cut off the line between the battery and the engine with the negative battery cable. Peel off the tape around the engine wire harness so the battery cable is visible. Remove each retaining fastener and routing clip, starting from the battery side to the vehicle, so the cable can be removed then pulled out. Place the battery cable in your vehicle and then add and secure retaining fasteners and routing clips, one by one, until the cable fits properly inside the engine wire harness. Attach the tape again to the engine wire harness assembly and reattach the negative battery cable.

OEM 2006 Jeep Liberty Battery Cable

Car Battery Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Battery Cables found

View related parts
2006 Jeep Liberty Battery Cable Part Number: 56050304AE
Product Specifications
- Other Name: Wiring - Alternator And Battery; Battery Cables; Positive Cable; Wiring Alternator And Battery
- Replaces: 56050304AD
- Item Weight: 2.30 Pounds
- Item Dimensions: 23.9 x 13.8 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56050304AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Liberty Submodels:
- Limited, Sport | 6 Cyl 3.7 L GAS
View related parts
2006 Jeep Liberty Battery Cable Part Number: 56050306AF
Product Specifications
- Other Name: Wiring - Alternator And Battery; Battery Cables; Positive Cable; Wiring Alternator And Battery
- Item Weight: 2.70 Pounds
- Item Dimensions: 12.5 x 12.6 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56050306AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Liberty Submodels:
- 65th Anniversary Edition, Renegade, Rocky Mountain Edition | 6 Cyl 3.7 L GAS
View related parts
2006 Jeep Liberty Battery Cable Part Number: 56050300AG
Product Specifications
- Other Name: Wiring - Alternator And Battery; Battery Cables; Positive Cable; Wiring Alternator And Battery
- Replaces: 56050300AE, 56050300AF
- Item Weight: 3.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56050300AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Liberty Submodels:
- Limited, Sport | 4 Cyl 2.8 L DIESEL

2006 Jeep Liberty Battery Cable Parts and Q&A

Q: What Are the Best Practices for Maintaining Battery Cables on 2006 Jeep Liberty?
A: First, check that the ignition is in Off and all connections to electrical accessories are turned off. Cut off the line between the battery and the engine with the negative battery cable. Peel off the tape around the engine wire harness so the battery cable is visible. Remove each retaining fastener and routing clip, starting from the battery side to the vehicle, so the cable can be removed then pulled out. Place the battery cable in your vehicle and then add and secure retaining fasteners and routing clips, one by one, until the cable fits properly inside the engine wire harness. Attach the tape again to the engine wire harness assembly and reattach the negative battery cable.