How to Service and Repair a Battery Tray on 2006 Jeep Liberty?

Before you service or repair the battery tray, lift the battery from the tray (1), then pull down and take the PDC out (1). After that, undo the three nuts (2) which keep the battery tray (1) to the front the left front wheelhouse inner panel and remove the battery tray from below the vehicle. Check and clean the battery tray (1) and then fit it into the weld studs on the inner door of the left front wheelhouse. Insert the three nuts (2) and tighten them until the battery reach 7 N.m (65 in. lbs.). Last, hook up the PDC to the bottom of the battery tray and lay the battery on the battery tray.

OEM 2006 Jeep Liberty Battery Tray

Battery Box

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Battery Trays found

View related parts
2006 Jeep Liberty Battery Tray Part Number: 55360654AB
$46.84 MSRP: $59.38
You Save: $12.54 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Battery; Vehicle Battery; Support Battery
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55360654AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Jeep Liberty Submodels:
- Limited, Sport | 4 Cyl 2.8 L DIESEL
View related parts
2006 Jeep Liberty Battery Tray Part Number: 55360639AB
Product Specifications
- Other Name: Support - Battery; Support Battery
- Item Weight: 3.50 Pounds
- Item Dimensions: 17.1 x 12.7 x 12.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55360639AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS

2006 Jeep Liberty Battery Tray Parts and Q&A

Q: How to Service and Repair a Battery Tray on 2006 Jeep Liberty?
A: Before you service or repair the battery tray, lift the battery from the tray (1), then pull down and take the PDC out (1). After that, undo the three nuts (2) which keep the battery tray (1) to the front the left front wheelhouse inner panel and remove the battery tray from below the vehicle. Check and clean the battery tray (1) and then fit it into the weld studs on the inner door of the left front wheelhouse. Insert the three nuts (2) and tighten them until the battery reach 7 N.m (65 in. lbs.). Last, hook up the PDC to the bottom of the battery tray and lay the battery on the battery tray.