How to Install a Battery Cable in an Engine Wire Harness Assembly on Jeep Liberty?

Route the battery cable in the vehicle and fasten and connect it to the battery wire harness assembly one retaining fastener and one routing clip at a time until the job is done. Secure the cable next, apply the tape to the engine wire harness assembly and hook the negative battery cable.

How to Maintain and Fix Battery Cables on Jeep Liberty?

For battery cable service and repair, take off any metallic jewelry because stray current could affect you. Begin by turning the bolt on the negative cable (2) counterclockwise to disconnect the negative cable and do the same to disconnect the positive side (1). After that, take out the stud (7) that holds the cable (6) in place on the inner fender. Take out the cable routing clips from inside the inner fender. Following that, take the positive cable retaining nut (1) off the stud on the Totally Integrated Power Module (3) and unhook the cable (2) from the stud. Remove the plus (positive) battery nut (1) from the generator's B+ terminal (5) and take the wire (2) out of the generator. In the same way, undo and remove the nut (4) securing the positive battery cable from the starter motor (3) and take off the cable (7) from the starter. After that, remove the negative cable nut from the stud on the engine block and free the cable from the stud. Next, get rid of any last battery cable pushpins (6), fasteners and clips, until the battery is fully released and then pull the cables out of the engine compartment.

OEM Jeep Liberty Battery Cable

Car Battery Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Battery Cables found

View related parts
Jeep Liberty Battery Cable Part Number: 56050304AE
Product Specifications
- Other Name: Wiring - Alternator And Battery; Battery Cables; Positive Cable; Wiring Alternator And Battery
- Replaces: 56050304AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Jeep Liberty | Limited, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Battery Cable Part Number: 56044501AG
Product Specifications
- Other Name: Wiring - Alternator And Battery; Battery Cables; Positive Cable
- Replaces: 56044501AC, 56044501AE, 56044501AB, 56044501AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Jeep Liberty | Limited, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Battery Cable Part Number: 4801358AB
Product Specifications
- Other Name: Wiring - Alternator And Battery; Battery Cables; Wiring Alternator And Battery
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Jeep Liberty | Limited, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Battery Cable Part Number: 56050299AC
Product Specifications
- Other Name: Wiring - Alternator And Battery; Battery Cables; Positive Cable
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Jeep Liberty | Sport | 4 Cyl 2.4 L GAS
View related parts
Jeep Liberty Battery Cable Part Number: 56044213AB
Product Specifications
- Other Name: Wiring - Alternator And Battery; Battery Cables; Positive Cable; Wiring Alternator And Battery
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Jeep Liberty | Sport | 4 Cyl 2.4 L GAS
View related parts
Jeep Liberty Battery Cable Part Number: 5104843AA
Product Specifications
- Other Name: Wiring - Alternator And Battery; Battery Cables; Positive Cable
- Replaces: 56044120AG, 56044120AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002 Jeep Liberty | Sport | 4 Cyl 2.4 L GAS
View related parts
Jeep Liberty Battery Cable Part Number: 56044172AE
Product Specifications
- Other Name: Wiring - Alternator And Battery; Battery Cables; Positive Cable
- Replaces: 56044172AC, 56044172AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002 Jeep Liberty | Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Battery Cable Part Number: 56010481AF
Product Specifications
- Other Name: Wiring - Alternator And Battery; Battery Cables; Positive Cable
- Replaces: 56010481AE, 56010481AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Jeep Liberty | Sport | 4 Cyl 2.4 L GAS
View related parts
Jeep Liberty Battery Cable Part Number: 56010479AF
Product Specifications
- Other Name: Wiring - Alternator; Battery Cables; Positive Cable
- Replaces: 56010479AD, 56010479AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Jeep Liberty | Renegade | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Battery Cable Part Number: 56044502AF
Product Specifications
- Other Name: Wiring - Alternator And Battery; Battery Cables; Positive Cable
- Replaces: 56044502AE, 56044502AD, 56044502AC, 56044502AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Jeep Liberty | Renegade | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Battery Cable Part Number: 56050306AF
Product Specifications
- Other Name: Wiring - Alternator And Battery; Battery Cables; Positive Cable; Wiring Alternator And Battery
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Jeep Liberty | 65th Anniversary Edition, Renegade, Rocky Mountain Edition | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Battery Cable Part Number: 56047253AH
Product Specifications
- Other Name: Wiring - Alternator And Battery; Battery Cables; Positive Cable
- Replaces: 56047253AC, 56047253AG, 56047253AD, 56047253AF, 56047253AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Jeep Liberty | Limited, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Battery Cable Part Number: 56050300AG
Product Specifications
- Other Name: Wiring - Alternator And Battery; Battery Cables; Positive Cable; Wiring Alternator And Battery
- Replaces: 56050300AE, 56050300AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Jeep Liberty | Limited, Sport | 2.8L L4, 4 Cyl 2.8 L DIESEL
View related parts
Jeep Liberty Battery Cable Part Number: 56010480AF
Product Specifications
- Other Name: Wiring - Alternator And Battery; Battery Cables; Positive Cable
- Replaces: 56010480AE, 56010480AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Jeep Liberty | Limited, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Battery Cable Part Number: 68055291AA
Product Specifications
- Other Name: Wiring - Alternator And Battery; Battery Cables; Positive Cable; Wiring Alternator And Battery
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Liberty | Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Battery Cable Part Number: 68078327AC
Product Specifications
- Other Name: Wiring - Alternator And Battery; Battery Cables; Positive Cable; Wiring Alternator And Battery
- Replaces: 68078327AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS

Jeep Liberty Battery Cable

Choose OEM Battery Cable that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Battery Cable follows strict manufacturing steps to lock in quality and fit. If your Jeep Liberty matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Liberty parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Electrical current from the battery to the needed components is delivered by battery cables of Jeep Liberty vehicles so that the starter would work and the engine turn on. These battery cables are also subjected to replacement time and again as they may wear out, get oxidized, corroded, damaged and it may lead to starting related problems or total failure to start. One has to inspect the Jeep Liberty battery cables from time to time to be certain that they are well maintained and to guarantee that they hold well. Various species of battery cables may have been used in different jeep liberty models, whereby the only difference which may be observed is the difference in the positive and the negative cables. The colourful cable carries power to the battery, whereas the black cable works as the electrical ground. In the event of any tear and wear or malfunction, premium replacement battery cables can be obtained to help rectify as and when necessary for a perfect and hassle-free start of Jeep Liberty.

Jeep Liberty Battery Cable Parts and Q&A

Battery Cable
56050304AE
Q: How to Install a Battery Cable in an Engine Wire Harness Assembly on Jeep Liberty?
A:
Route the battery cable in the vehicle and fasten and connect it to the battery wire harness assembly one retaining fastener and one routing clip at a time until the job is done. Secure the cable next, apply the tape to the engine wire harness assembly and hook the negative battery cable.
Battery Cable
56047253AH
Q: How to Maintain and Fix Battery Cables on Jeep Liberty?
A:
For battery cable service and repair, take off any metallic jewelry because stray current could affect you. Begin by turning the bolt on the negative cable (2) counterclockwise to disconnect the negative cable and do the same to disconnect the positive side (1). After that, take out the stud (7) that holds the cable (6) in place on the inner fender. Take out the cable routing clips from inside the inner fender. Following that, take the positive cable retaining nut (1) off the stud on the Totally Integrated Power Module (3) and unhook the cable (2) from the stud. Remove the plus (positive) battery nut (1) from the generator's B+ terminal (5) and take the wire (2) out of the generator. In the same way, undo and remove the nut (4) securing the positive battery cable from the Starter Motor (3) and take off the cable (7) from the starter. After that, remove the negative cable nut from the stud on the engine block and free the cable from the stud. Next, get rid of any last battery cable pushpins (6), fasteners and clips, until the battery is fully released and then pull the cables out of the engine compartment.