How to Service and Repair the Axle Shaft of the 194RBI on 2006 Jeep Wrangler?

Service and repair work on the rear axle of the 194RBI should begin with lifting the vehicle on a hoist with the gear in neutral. After removing the brake drum and the differential cover, drain the fluid inside. Turn the differential case so you can reach the pinion mate gear shaft lock screw, then take out both the lock screw and the shaft. Pull the axle C-clip lock by pushing the axle shaft further inside and slide out the axle shaft after that. When you install the bearing and seal, grease the bore and seal lip with gear lubricant, slide the axle shaft into place and thread the shaft into the side gear. Make sure the axle shaft is out, then push the C-clip lock into the side gear. Insert the pinion mate shaft into the differential through the thrust washers and pinion gears. Match the holes on the shaft and case together, position the lock screw on this hole, add some Loctite and tighten the screw to 19 Nm (14 ft. lbs.). Now, put the differential cover back onto the housing.

OEM 2006 Jeep Wrangler Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Axle Shafts found

View related parts
2006 Jeep Wrangler Axle Shaft, Rear Passenger Side Part Number: 5083676AA
Product Specifications
- Other Name: Shaft - Axle; Drive Axle Shaft, Rear Right; Axle Shafts; Shaft Axle
- Position: Rear Passenger Side
- Item Weight: 21.90 Pounds
- Item Dimensions: 33.2 x 8.2 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5083676AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Axle Shafts Part Number: 4874306
Product Specifications
- Other Name: Shaft - Axle; Axle Shaft; Axle Shaft Assembly; Axle Assembly; Shaft Axle
- Item Weight: 18.40 Pounds
- Item Dimensions: 40.2 x 6.5 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4874306
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Axle Shafts Part Number: 5083667AA
Product Specifications
- Other Name: Shaft - Axle; Axle Shaft; Axle Shaft Assembly; Shaft Axle
- Replaces: 5083667AC, 5083667AB
- Item Weight: 15.20 Pounds
- Item Dimensions: 29.9 x 6.3 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5083667AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Axle Shafts Part Number: 5083666AA
Product Specifications
- Other Name: Shaft - Axle; Axle Shaft; Axle Shaft Assembly; Shaft Axle
- Replaces: 5083666AB, 5083666AC
- Item Weight: 18.90 Pounds
- Item Dimensions: 37.1 x 5.4 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5083666AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Axle Shafts Part Number: 5135221AA
Product Specifications
- Other Name: Shaft - Axle; Axle Shaft; Shaft Axle
- Item Weight: 24.10 Pounds
- Item Dimensions: 32.2 x 7.7 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5135221AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Axle Shafts Part Number: 5135220AA
Product Specifications
- Other Name: Shaft - Axle; Axle Shaft; Shaft Axle
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5135220AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Axle Shaft, Rear Driver Side Part Number: 5086641AA
Product Specifications
- Other Name: Shaft - Axle; Drive Axle Shaft, Rear Left; Axle Shafts; Shaft Axle
- Position: Rear Driver Side
- Item Weight: 21.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086641AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Axle Shaft, Rear Passenger Side Part Number: 5086640AA
Product Specifications
- Other Name: Shaft - Axle; Drive Axle Shaft, Rear Right; Axle Shafts; Shaft Axle
- Position: Rear Passenger Side
- Item Weight: 19.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086640AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Axle Shaft, Rear Driver Side Part Number: 5086633AA
Product Specifications
- Other Name: Shaft - Axle; Drive Axle Shaft, Rear Left; Axle Shafts; Shaft Axle
- Position: Rear Driver Side
- Item Weight: 22.40 Pounds
- Item Dimensions: 33.9 x 8.2 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086633AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Axle Shaft, Rear Passenger Side Part Number: 5086632AA
Product Specifications
- Other Name: Shaft - Axle; Drive Axle Shaft, Rear Right; Axle Shafts; Shaft Axle
- Position: Rear Passenger Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086632AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Axle Shaft, Rear Driver Side Part Number: 5083677AA
Product Specifications
- Other Name: Shaft - Axle; Drive Axle Shaft, Rear Left; Axle Shafts; Shaft Axle
- Position: Rear Driver Side
- Item Weight: 21.90 Pounds
- Item Dimensions: 33.9 x 8.9 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5083677AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Axle Shafts Part Number: 4874307
Product Specifications
- Other Name: Shaft - Axle; Axle Shaft; Axle Shaft Assembly; Axle Assembly; Shaft Assembly, Axle; Shaft Axle
- Item Weight: 12.40 Pounds
- Item Dimensions: 22.4 x 3.2 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4874307
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Axle Shafts Part Number: 4874303
Product Specifications
- Other Name: Shaft - Axle; Axle Shaft; Axle Shaft Assembly; Axle Assembly; Shaft Axle
- Item Weight: 11.00 Pounds
- Item Dimensions: 29.3 x 6.0 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4874303
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Base, Islander, Laredo, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Jeep Wrangler Axle Shafts Part Number: 4874302
Product Specifications
- Other Name: Shaft - Axle; Axle Shaft; Axle Shaft Assembly; Axle Assembly; Shaft Axle
- Item Weight: 17.70 Pounds
- Item Dimensions: 40.5 x 5.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4874302
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Base, Islander, Laredo, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS

2006 Jeep Wrangler Axle Shaft Parts and Q&A

Q: How to Service and Repair the Axle Shaft of the 194RBI on 2006 Jeep Wrangler?
A: Service and repair work on the rear axle of the 194RBI should begin with lifting the vehicle on a hoist with the gear in neutral. After removing the brake drum and the differential cover, drain the fluid inside. Turn the differential case so you can reach the pinion mate gear shaft lock screw, then take out both the lock screw and the shaft. Pull the axle C-clip lock by pushing the axle shaft further inside and slide out the axle shaft after that. When you install the bearing and seal, grease the bore and seal lip with gear lubricant, slide the axle shaft into place and thread the shaft into the side gear. Make sure the axle shaft is out, then push the C-clip lock into the side gear. Insert the pinion mate shaft into the differential through the thrust washers and pinion gears. Match the holes on the shaft and case together, position the lock screw on this hole, add some Loctite and tighten the screw to 19 Nm (14 ft. lbs.). Now, put the differential cover back onto the housing.