How to Service Battery Cables in a Wire Harness on 2006 Jeep Wrangler?

To maintain the battery wire harness, one has to disconnect the negative and positive wire, but only with the ignition off. Take away the needed terminal clamps and cables and put in the new harness, connecting all the connections to the required tightening. Lastly, put petroleum jelly or grease on terminals.

OEM 2006 Jeep Wrangler Battery Cable

Car Battery Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Battery Cables found

View related parts
2006 Jeep Wrangler Cable Assembly Part Number: 56047555AD
Product Specifications
- Other Name: Wiring - Battery; Battery Cable Harness; Battery Cables; Positive Cable
- Replaces: 56047555AC
- Item Weight: 7.50 Pounds
- Item Dimensions: 25.8 x 13.4 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56047555AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sport, Unlimited, Unlimited Rubicon, X | 4.0L V6, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Cable Assembly Part Number: 56047559AD
Product Specifications
- Other Name: Wiring - Battery; Battery Cable Harness; Battery Cables; Positive Cable
- Replaces: 56047559AC
- Item Weight: 3.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56047559AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- SE | 2.4L L4, 4 Cyl 2.4 L GAS

2006 Jeep Wrangler Battery Cable Parts and Q&A

Q: How to Service Battery Cables in a Wire Harness on 2006 Jeep Wrangler?
A: To maintain the battery wire harness, one has to disconnect the negative and positive wire, but only with the ignition off. Take away the needed terminal clamps and cables and put in the new harness, connecting all the connections to the required tightening. Lastly, put petroleum jelly or grease on terminals.