How to Ensure Proper Functioning of a Fuel Injector on a 2006 Jeep Wrangler?

The first step to fixing a fuel injector is taking out the fuel rail. Afterward, pull off the holding clips that join the fuel injectors to the fuel rail. Push the fuel injectors into the fuel rail assembly and clip them in place using the retaining clips. Replace both O-rings with new ones when you install the same injectors, asidenote: Use a black O-ring at the intake manifold end and a red or rust colored O-ring at the fuel rail end. Apply just a drop of clean engine oil to every O-ring in each injector to make installing them easier. Afterward, attach the fuel rail again, start the engine and make sure there are no fuel leaks.

OEM 2006 Jeep Wrangler Fuel Injector

Gas Injector

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Injectors found

View related parts
2006 Jeep Wrangler Injector Part Number: 53013656AA
$67.35 MSRP: $101.00
You Save: $33.65 (34%)
ADD TO CART
Product Specifications
- Other Name: Injector - Fuel; Fuel Injector; Injector Fuel
- Replaces: RL013656AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.8 x 3.9 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53013656AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- SE | 4 Cyl 2.4 L GAS
View related parts
2006 Jeep Wrangler Injector Part Number: 53013690AA
Product Specifications
- Other Name: Injector - Fuel; Fuel Injector; Injector Fuel
- Replaces: RL013690AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53013690AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sport, Unlimited, Unlimited Rubicon, X | 6 Cyl 4.0 L GAS

2006 Jeep Wrangler Fuel Injector Parts and Q&A

Q: How to Ensure Proper Functioning of a Fuel Injector on a 2006 Jeep Wrangler?
A: The first step to fixing a fuel injector is taking out the fuel rail. Afterward, pull off the holding clips that join the fuel injectors to the fuel rail. Push the fuel injectors into the fuel rail assembly and clip them in place using the retaining clips. Replace both O-rings with new ones when you install the same injectors, asidenote: Use a black O-ring at the intake manifold end and a red or rust colored O-ring at the fuel rail end. Apply just a drop of clean engine oil to every O-ring in each injector to make installing them easier. Afterward, attach the fuel rail again, start the engine and make sure there are no fuel leaks.