How to Access and Inspect a Fuel Injector on 2007 Jeep Wrangler?

First, you have to remove the fuel rail to reach the fuel injectors. The first step is to unplug the wire connector from every injector. Twist the injector by 180 degrees and pull it off the rail so the clip comes along. Detect any damage to the injector O-ring; if you see any, you have to change it. After reusing an injector, cover the tip with a protective cap to avoid damage and fix or replace the clip if it is broken. Go on to repeat these procedures for the rest of the injectors.

OEM 2007 Jeep Wrangler Fuel Injector

Gas Injector

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Injector found

View related parts
2007 Jeep Wrangler Injector Part Number: 4861667AA
$139.25 MSRP: $207.00
You Save: $67.75 (33%)
ADD TO CART
Product Specifications
- Other Name: Injector - Fuel; Gasoline Injector; Fuel Injector; Injector Fuel
- Replaces: RL861667AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4861667AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X, X-S | 6 Cyl 3.8 L GAS

2007 Jeep Wrangler Fuel Injector Parts and Q&A

Q: How to Access and Inspect a Fuel Injector on 2007 Jeep Wrangler?
A: First, you have to remove the fuel rail to reach the fuel injectors. The first step is to unplug the wire connector from every injector. Twist the injector by 180 degrees and pull it off the rail so the clip comes along. Detect any damage to the injector O-ring; if you see any, you have to change it. After reusing an injector, cover the tip with a protective cap to avoid damage and fix or replace the clip if it is broken. Go on to repeat these procedures for the rest of the injectors.