How to Service and Repair a Tie Rod End on 2006 Jeep Wrangler?

To take care of the tie rod end, remove the cotter pins and nuts found at the steering knuckle and drag link. Use tool C-4150A to help remove the ball studs. If you're not using them, unfasten the bolts securing the end clamps and Release the tie rod ends from the tube. Should installation be necessary, add the tie rod ends to the tube, place the tie rod clamp in the right position and tighten it to 27 Nm (20 ft. lbs.). Then, connect the tie rod to the drag link and steering knuckle and put in 47 Nm (35 ft. lbs.) torque onto both the ball stud nut on the steering knuckle and the one on the drag link. You should finish by replacing all the cotter pins.

OEM 2006 Jeep Wrangler Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Tie Rod Ends found

View related parts
2006 Jeep Wrangler Tie Rod End, Outer Driver Side Part Number: 52005741
$53.73 MSRP: $118.00
You Save: $64.27 (55%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod; Steering Tie Rod End, Left Outer; Drag Link Repair Kit; Outer Tie Rod End; Drag Link; Inner Tie Rod; Outer Tie Rod; Drag Link End; Tie Rod Ends for steering system.
- Position: Outer Driver Side
- Item Weight: 1.80 Pounds
- Item Dimensions: 6.7 x 3.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52005741
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Base, Islander, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Tie Rod End, Inner Passenger Side Part Number: 52005740
$77.10 MSRP: $118.00
You Save: $40.90 (35%)
ADD TO CART
Product Specifications
- Other Name: Tie Rod; Steering Tie Rod End, Right Inner; Drag Link Repair Kit; Outer Tie Rod End; Center Link; Drag Link; Inner Tie Rod; Outer Tie Rod; End, Tie Rod (Passenger Side Th'D); Socket Tie Rod Inner; Steering Tie Rod End
- Position: Inner Passenger Side
- Item Weight: 1.90 Pounds
- Item Dimensions: 6.5 x 3.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52005740
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Base, Islander, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Tie Rod End, Front Part Number: 52005739
$68.63 MSRP: $103.00
You Save: $34.37 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod; Steering Tie Rod End, Left Inner; Front Tie Rod; Drag Link Kit; Outer Tie Rod; Center Link; Inner Tie Rod, Outer Tie Rod, Drag Link End, Tie Rod Ends, Steering Tie Rod End.
- Position: Front
- Item Weight: 1.90 Pounds
- Item Dimensions: 6.3 x 3.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52005739
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Base, Islander, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2006 Jeep Wrangler Tie Rod End Parts and Q&A

Q: How to Service and Repair a Tie Rod End on 2006 Jeep Wrangler?
A: To take care of the tie rod end, remove the cotter pins and nuts found at the steering knuckle and drag link. Use tool C-4150A to help remove the ball studs. If you're not using them, unfasten the bolts securing the end clamps and Release the tie rod ends from the tube. Should installation be necessary, add the tie rod ends to the tube, place the tie rod clamp in the right position and tighten it to 27 Nm (20 ft. lbs.). Then, connect the tie rod to the drag link and steering knuckle and put in 47 Nm (35 ft. lbs.) torque onto both the ball stud nut on the steering knuckle and the one on the drag link. You should finish by replacing all the cotter pins.