Other Name: Hose - Power Steering Supply; Power Steering Reservoir Hose; Power Steering Hose; Power Steering Suction Hose; Upper Return Hose; Hose Power Steering Supply Reservoir To Pump; Hose Power Steering Supply
Item Weight: 1.00 Pounds
Item Dimensions: 17.5 x 7.4 x 3.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4782350AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Other Name: Hose - Power Steering Pressure; Power Steering Hose
Replaced by: 4782954AG
Item Weight: 0.60 Pounds
Item Dimensions: 22.2 x 8.2 x 5.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4782954AF
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Chrysler 300 Submodels:
C | 8 Cyl 5.7 L GAS
2007 Chrysler 300 Power Steering Hose Parts and Q&A
Q: How to Service and Repair the Power Steering Hose to Cooler in AWD on 2007 Chrysler 300?
A: Before servicing or repairing the power steering line/hose on the Gear To Cooler - AWD, take the negative battery cable from the battery post. Drain the power steering fluid from the pump reservoir and at that stage, lift and hold the vehicle with a jack. Remove the belly pan and then take out the hose clamp before the return hose at the cooler. Cut the return hose loose from its guiding hook on the cooling module, then unscrew the return hose tube nut from the steering gear. Loosen the last screws in the routing clamps that secure the return hose to the right side of the engine cradle and pull out the hose from the car.