How to Remove a Blower Motor Resistor on 2007 Chrysler Crossfire?

Bring down the lower instrument panel cover before trying to get at the blower motor resistor. After that, pull out the electrical connector from the relief in the blower motor door. Release the motor door catch mounts from their positions on the side and swing the blower motor door down, as you can only plug the electrical leads into the blower motor in one direction. Remove the electrical leads in the blue and red cables from the GXV4. Remove all the screws connecting the blower motor resistor to the blower motor assembly and then take out the resistor.

OEM 2007 Chrysler Crossfire Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor Resistor found

View related parts
2007 Chrysler Crossfire Resistor Part Number: 5096900AD
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; Regulator, Passenger Compartment Fan; Blower Motor Resistor
- Replaces: 5096900AA, 5096900AC, 5096900AB
- Item Weight: 1.10 Pounds
- Item Dimensions: 7.0 x 5.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5096900AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2007 Chrysler Crossfire Blower Motor Resistor Parts and Q&A

Q: How to Remove a Blower Motor Resistor on 2007 Chrysler Crossfire?
A: Bring down the lower instrument panel cover before trying to get at the blower motor resistor. After that, pull out the electrical connector from the relief in the blower motor door. Release the motor door catch mounts from their positions on the side and swing the blower motor door down, as you can only plug the electrical leads into the blower motor in one direction. Remove the electrical leads in the blue and red cables from the GXV4. Remove all the screws connecting the blower motor resistor to the blower motor assembly and then take out the resistor.