How to Install an Exhaust Manifold on the Right Side on 2007 Chrysler Crossfire?

To fit the right exhaust manifold, set it and the gaskets on the cylinder head, install the nuts and tighten them to the amount shown. After that, put in the right side catalytic converter, fit the lower splash shield and screws and tighten them to 5 Nm (44 in. lbs.). After finishing the lowering, put in the air cleaner and connect the negative battery cable. Turn on the engine at the end and watch for exhaust leaks.

OEM 2007 Chrysler Crossfire Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Exhaust Manifolds found

View related parts
2007 Chrysler Crossfire Exhaust Manifold, Driver Side Part Number: 5101529AA
$77.65 MSRP: $683.00
You Save: $605.35 (89%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold Exhaust
- Position: Driver Side
- Replaces: 5159845AA
- Item Weight: 6.80 Pounds
- Item Dimensions: 17.7 x 7.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5101529AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2007 Chrysler Crossfire Exhaust Manifold, Passenger Side Part Number: 5101528AA
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold Exhaust
- Position: Passenger Side
- Item Weight: 6.90 Pounds
- Item Dimensions: 18.0 x 6.0 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5101528AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2007 Chrysler Crossfire Exhaust Manifold Parts and Q&A

Q: How to Install an Exhaust Manifold on the Right Side on 2007 Chrysler Crossfire?
A: To fit the right exhaust manifold, set it and the gaskets on the cylinder head, install the nuts and tighten them to the amount shown. After that, put in the right side catalytic converter, fit the lower splash shield and screws and tighten them to 5 Nm (44 in. lbs.). After finishing the lowering, put in the air cleaner and connect the negative battery cable. Turn on the engine at the end and watch for exhaust leaks.