OEM 2007 Chrysler Crossfire Ignition Coil

2007 Chrysler Crossfire Ignition Coil Parts and Q&A

• Q: How to Properly Install an Ignition Coil and Connect Spark Plug Cables on 2007 Chrysler Crossfire?

  A: Guide the ignition coil into position on the cylinder head cover and join it using the ignition coil retaining bolt, fixing it tightly at 8 Nm (71 in. lbs.). Attach the ignition coil wire harness connector to the coil pack and see that the spark plug cables are properly installed for correct spark plug phase-shift. Place the positive cable from each coil cable connector to the correct pin on the coil tower and the negative cable from the coil cable to the correct spark plug location in the cylinder head, following the guide pad on the cover. Making a positive bond between the spark plug cable and the spark plug will be noticeable by a strong snap sound. Ensure that each of the spark plug's cables is securely connected to the spark plug stud. Place the engine cover by matching the retaining clips with the rubber mounts and pressing the engine cover down on the rubber until it meets with the rubber clips and add a little bit of oil onto the rubber mounts on the engine cover to help ease installation. In the end, attach the black lead to the negative battery.