OEM 2008 Chrysler Crossfire Ignition Coil

2008 Chrysler Crossfire Ignition Coil Parts and Q&A

• Q: How to Properly Position and Install an Ignition Coil on 2008 Chrysler Crossfire?

  A: Attach the ignition coil on the cylinder head cover and add the ignition coil bolts, tighten each to 8 Nm (71 in. lbs.). Link the ignition coil wire harness connector to the coil pack so that you avoid the spark plug cables leading to a wrong spark phase. Install the spark plug cables to both the coil tower opening and the spark plug socket, referring to the pad cast into the cylinder head cover to be sure on orientation. Making sure the connection between the spark plug cable and the spark plug is positive, you should feel a "click" or "snap" after the install. Ensure that a tight connection exists between the spark plug cables and the spark plugs. Take the rubber engine cover from its packaging and align the retaining clips to the rubber mounts, then push down on it to attach it to the rubber mounts, applying a little bit of lubricant to each rubber area. Connect the negative battery cable to finish the job.