Other Name: Airbag - Driver; Steering Wheel Air Bag
Position: Driver Side
Replaces: 1EE14BD5AA
Item Weight: 4.50 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 1EE14BD5AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
Base, Limited | 3.2L V6, 6 Cyl 3.2 L GAS
2007 Chrysler Crossfire Air Bag Parts and Q&A
Q: How to Install an Air Bag for Knee Protection on 2007 Chrysler Crossfire?
A: Switch off the supplemental restraint system by cutting off and isolating the negative battery cable before you leave it for a couple of minutes to allow the system capacitor to discharge. Disconnect the negative battery cable before you fit the knee blocker air bag into the instrument panel. Bring the electrical connector together, hold and secure the harness in place and then set the two Knee Blockers at the bolting points. Be sure to tighten the bolts to 21 Nm (178 in. lbs.). Clip both ends of the air bag cover to the glove box and dash panel and then attach the four Knee Blocker cover screws. Make sure you don't attach the negative battery cable until you complete the supplemental restraints verification test. It is important to complete the Supplemental Restraint System (Srs) - Verification Test in the end.