How to Service and Repair the MAP Sensor for a 3.8L Engine on 2007 Chrysler Pacifica?

You should start the service and repair of the Manifold Pressure/Vacuum Sensor for 3.8L engines by disconnecting the negative battery cable first. After that, unlock and take out the electrical connector. Later, open and disconnect the front cover, remove the mounting screws and slot out the sensor.

OEM 2007 Chrysler Pacifica MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2007 Chrysler Pacifica M.A.P. Sensor Part Number: 68199324AB
$61.94 MSRP: $84.25
You Save: $22.31 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 5033310AC, 68199324AA, 5149091AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 6.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68199324AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.8L V6, 4.0L V6, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2007 Chrysler Pacifica MAP Sensor Parts and Q&A

Q: How to Service and Repair the MAP Sensor for a 3.8L Engine on 2007 Chrysler Pacifica?
A: You should start the service and repair of the Manifold Pressure/Vacuum Sensor for 3.8L engines by disconnecting the negative battery cable first. After that, unlock and take out the electrical connector. Later, open and disconnect the front cover, remove the mounting screws and slot out the sensor.