How to Maintain the Seat Heater Switch for Second Row Seats on 2006 Chrysler Pacifica?

Question

Accepted Answer

Before dealing with the heated seat switches for the 2nd row seats, disconnect and set aside the battery cable's negative point. After taking out the rear floor console, unblock each end of the switch bezel with your finger and gently push the switch bezel up and out through the front side of the console. Eliminate the connector on the heated seat switch and use a flat object to gently free the switch off the bezel from the seat. While performing installation, secure both rear heated switches into the rear floor console switch bezel's back, so that the tabs connecting them are fully in place. Connect the parts of the wire harness to the rear heated seat switches, then push the rear floor console switch bezel into the console from the front and verify that the bezel tabs are in place. Place the rear floor console back in its spot, link the negative battery cable and check that heated seats in the 2nd row function as intended.

OEM 2006 Chrysler Pacifica Seat Heater Switch

2 Seat Heater Switches found

2006 Chrysler Pacifica Seat Switch, Passenger Side Part Number: UF24XDVAA

2006 Chrysler Pacifica Seat Switch, Driver Side Part Number: UF25XDVAA

2006 Chrysler Pacifica Seat Heater Switch Parts and Q&A

Related 2006 Chrysler Pacifica Parts

Alternate Year Models