Other Name: Switch - Power Seat; Power Seat Switch, Front Left; Power Seat Switch; Adjuster Switch
Position: Front Driver Side
Replaces: 1AK87XDVAB
Item Weight: 0.80 Pounds
Item Dimensions: 5.6 x 4.4 x 3.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 1AK87XDVAC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Chrysler Pacifica Submodels:
Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
2007 Chrysler Pacifica Seat Switch Parts and Q&A
Q: How to Service and Repair a Seat Switch on 2007 Chrysler Pacifica?
A: Turn off the voltage by taking out and isolating the battery negative cable before you work on the power seat switch. Remove the front door trim panel, then depress the retaining tab and pull the wire harness connector straight from the driver door module. With that done, attach all four clips on the seat switch to hold it firmly against the door trim and then slide out the power seat switch from the door panel.