How to Install the Driver Seat Switch on 2008 Chrysler Pacifica?

For installation, place the seat switch on the door panel, press it down and make sure all four clips have clicked into place. Attach the wire harness connector to the driver door module and then put in the front door trim panel. After that, replace the negative battery clip.

OEM 2008 Chrysler Pacifica Seat Switch

Seat Adjust Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Seat Switches found

View related parts
2008 Chrysler Pacifica Seat Switch, Passenger Side Part Number: UF24XDVAA
$5.51 MSRP: $6.98
You Save: $1.47 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Right; Switch; Switch Heated Seat; Seat Heater Switch
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UF24XDVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Seat Switch, Front Driver Side Part Number: YD13XDVAF
$260.37
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Power Seat; Power Seat Switch, Front Left; Power Seat Switch; Adjuster Switch
- Position: Front Driver Side
- Replaces: YD13XDVAC, YD13XDVAE, YD13XDVAD
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.7 x 4.5 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YD13XDVAF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Seat Switch, Driver Side Part Number: UF25XDVAA
Product Specifications
- Other Name: Switch; Seat Heater Switch, Left; Switch Heated Seat; Seat Heater Switch
- Position: Driver Side
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UF25XDVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Seat Switch, Front Driver Side Part Number: 1AK91XDVAB
Product Specifications
- Other Name: Switch - Power Seat; Power Seat Switch, Front Left; Adjuster Switch; Switch Power Seat; Power Seat Switch
- Position: Front Driver Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.7 x 4.9 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1AK91XDVAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Seat Switch, Front Passenger Side Part Number: YD08XDVAD
Product Specifications
- Other Name: Switch - Power Seat; Power Seat Switch, Front Right; Power Seat Switch; Adjuster Switch
- Position: Front Passenger Side
- Replaces: YD08XDVAB, YD08XDVAC
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YD08XDVAD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Seat Switch, Front Driver Side Part Number: 1AK87XDVAC
Product Specifications
- Other Name: Switch - Power Seat; Power Seat Switch, Front Left; Power Seat Switch; Adjuster Switch
- Position: Front Driver Side
- Replaces: 1AK87XDVAB
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.6 x 4.4 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1AK87XDVAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Pacifica Seat Switch Parts and Q&A

Q: How to Install the Driver Seat Switch on 2008 Chrysler Pacifica?
A: For installation, place the seat switch on the door panel, press it down and make sure all four clips have clicked into place. Attach the wire harness connector to the driver door module and then put in the front door trim panel. After that, replace the negative battery clip.