Other Name: Handle - Exterior Door; Exterior Door Handle, Rear Left Outer; Handle Exterior Door; Exterior Door Handle
Position: Rear Outer Driver Side
Replaces: TY25AXRAC, TY25AXRAB
Item Weight: 1.00 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: TY25AXRAD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Chrysler Pacifica Submodels:
Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
| Page 1 of 4 |Next >
1-20 of 72 Results
2007 Chrysler Pacifica Door Handle Parts and Q&A
Q: How to Maintain and Fix a Door Handle on the Rear Exterior on 2007 Chrysler Pacifica?
A: First, roll up the door glass before you do any service or repair work on the rear door exterior handle. You may need to get rid of the door trim panel and takedown the watershield to have access to the door handle. After that, remove the handle cover's screw, then detach the clip that joins the outer door handle to the door latch. Open the screw in the screw hole on the inside door frame to remove the outer handle cover. Open the outside door from the inside and pull its handle and cover back into the back part of the vehicle to take them both out. After that, unscrew the brackets of the main handle and lift the assembly out of the outer door panel.