OEM 2007 Chrysler Pacifica Washer Reservoir

2007 Chrysler Pacifica Washer Reservoir Parts and Q&A

• Q: How to Install a Windshield Washer Reservoir on 2007 Chrysler Pacifica?

  A: Right after installing the nozzle hoses, place the lower filler tube 7 into its location near the engine, hook it up with the upper filler tube 7 and attach both with a bolt at the upper filler tube 7. Slide reservoir 5 into filler tube 7 and put in the three bolts that hold it to the case. First, hook the lower fascia onto the grille clips, then fasten the upper bolts to the ends (ears) and insert the lower fascia push pins. Tighten the screws at the left wheel opening splash shield, take the vehicle off the hoist, attach the battery's negative cable, fill the washer fluid and shut the hood.