How to Service and Repair a Wiper Motor on 2007 Chrysler Pacifica?

You should start by cutting off the negative battery connection when servicing or repairing the wiper motor. Take out the rear wiper arm afterward and lift the gate to remove the rear liftgate panel. First disconnect the electrical connector for the rear wiper motor and then undo the three rear wiper mounting screws. Removing the wiper motor from the liftgate should be the last step.

OEM 2007 Chrysler Pacifica Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Motors found

View related parts
2007 Chrysler Pacifica Wiper Motor Part Number: 5102228AA
Product Specifications
- Other Name: Motor - Windshield Wiper; Windshield Wiper Motor; Front Motor; Motor Windshield Wiper
- Item Weight: 3.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102228AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Chrysler Pacifica Wiper Motor Part Number: 4894283AC
Product Specifications
- Other Name: Motor, Liftgate Wiper; Back Glass Wiper Motor; Rear Motor
- Replaces: 4894283AB, 4894283AA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4894283AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.8L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2007 Chrysler Pacifica Wiper Motor Parts and Q&A

Q: How to Service and Repair a Wiper Motor on 2007 Chrysler Pacifica?
A: You should start by cutting off the negative battery connection when servicing or repairing the wiper motor. Take out the rear wiper arm afterward and lift the gate to remove the rear liftgate panel. First disconnect the electrical connector for the rear wiper motor and then undo the three rear wiper mounting screws. Removing the wiper motor from the liftgate should be the last step.